Abstract:Natural fiber reinforced plastics (NFRPs) represent a promising category of emerging materials for sustainable industrial development owing to their renewability, degradability, and lightweight. However, the polarity mismatch between the fibers and polymer matrices weakens the mechanical properties of NFRPs. To address this issue, a novel hierarchical interface design was proposed here through the co-modification of silane coupling agents (SCAs) and zinc oxide nanorods (ZnO NRs), which exhibits not only high efficiency but also low energy consumption and environmental friendliness. Specifically, the hierarchical interface design was demonstrated on jute fibers (JFs)/polypropylene (PP) composites, where the JFs/ZnO interfaces were chemically bonded through complexation, chelation, or coordination using various SCAs; meanwhile, the ZnO/PP interfaces were physically bonded by interlocking effect. The experimental testing results indicated the exceptional mechanical properties of modified JFs and their composites. The JFs modified with 3-glycidyloxypropyltrimethoxysilane (KH560) and ZnO NRs exhibited an increase of 34.3% and 55.8% in single-fiber tensile strength and tensile modulus, respectively, compared to sololy ZnO coated JFs, and also showed an augment of 30.8% in the interfacial shear strength with PP resin. Thus, the transverse and longitudinal tensile strength of JFs/PP composites with combined modification of KH560 and ZnO NRs were 19.2% and 46.5% higher than untreated ones. The interfacial enhancement mechanism was ascribed to the synergistic effect of chemical bonding and physical interlocking, as revealed by molecular dynamics simulation and observation of fracture morphologies. The findings offer a cost-effective solution for developing JFs/PP composites with superior interfacial and mechanical properties, thereby promoting the practical applications and value of NFRPs.

Functionalized soybean/tung oils for combined plasticization of jute fiber-reinforced polypropylene

Enhancement on the properties of polypropylene using bamboo particles: Effect of particle sizes and loadings

Polypropylene biocomposites reinforced with bamboo particles and ultrafine bamboo-char: The effect of blending ratio

Toughness Enhancement of Poly(lactic Acid), Bamboo Particle and Ultrafine Bamboo-Char Ternary Biocomposites by Polyethylene Glycol Plasticization

Oriented distribution structure, interaction, and performance of thermoplastic polyurethane/selective hindered amine hybrids

The Structure and Dynamic Properties of Thermoplastic Polyurethane Elastomer/Hindered Phenol Hybrids

Study on Properties of Modified Bamboo Fiber Reinforced Polypropylene Composites

Fiber treatment impact on toughness and interfacial bonding in epoxidized soya bean oil compatibilized PLA/PBAT bamboo fiber composites

Preparation of high‐performance poly(butylene adipate‐co‐terephthalate)/thermoplastic starch compounds with epoxidized soybean oil as compatibilizer

Improved Mechanical Properties of Jute Fiber/Polypropylene Composite with Interface Modified by Sodium Lignosulfonate

The Effect of Epoxidized Soybean Oil on the Physical and Mechanical Properties of PLA/PBAT/PPC Blends by the Reactive Compatibilization

Soybean-Based Polyol as a Substitute of Fossil-Based Polyol on the Synthesis of Thermoplastic Polyurethanes: The Effect of Its Content on Morphological and Physicochemical Properties

THE EFFECTS OF EXPOXIDIZED SOYBEAN OIL ON THE MECHANICAL, WATER ABSORPTION THERMAL STABILITY AND MELTING PROCESSING PROPERTIES OF WOOD PLASTIC COMPOSITES

Natural jute fiber treated with silane coupling agent KH570 reinforced polylactic acid composites: mechanical and thermal properties

Effect of Jute Fiber Modification on Mechanical Properties of Jute Fiber Composite

The Mechanical Properties of Jute/PLA Composites Combining Nano Polymerized Styrene Butadiene Rubber Modified by Coupling Agents

Effect of short jute fibers on the hydrolytic degradation behavior of poly(lactic acid)

Effect of the synergistic interaction of zinc adipate, hydrotalcite and ethylene propylene rubber on the performances of polypropylene

Spray‐free polypropylene composites reinforced by coupling agent treated jute fiber

Hierarchical interface design of jute fibers/polypropylene composites for enhanced interfacial and mechanical properties

Effect of oligomers from epoxidized soybean oil and sebacic acid on the toughness of polylactic acid /bamboo fiber composites