Abstract:It is known that Ni-based superalloys possess superior mechanical properties in high-temperature and high-pressure environments. One of the drawbacks of these alloys is their tendency to oxidize at high temperatures. Improving their oxidation properties and obtaining a fundamental understanding of the underlying mechanism of their oxidation behavior are critical for high temperature applications. In this work, we manufactured IN792 Ni-based alloys with two different grain sizes to examine the effect of grain size on oxidation behavior at 850 o C and 980 o C. The oxidation rate became faster as the grain size became finer, and at 850 o C, the oxide layer was composed of external oxides (TiO 2 /NiO, Ni-Co-Cr-O, Cr 2 O 3 ), internal oxides (TiTaO 4 , non-oxidized layer, Al 2 O 3 ) and a precipitate-free zone (PFZ). At 980 o C, this structure became unstable due to the diffusion of Ni, and in particular, a lot of exfoliation of external oxides occurred in the coarse grain. Regardless of the structure of the oxide layers, the thickness of the PFZ increased significantly in the fine grains with a low  fraction. Compared to the hardness of external Cr-rich oxides of ~500 HV, the hardnesses of the internal oxides consisting of Al-rich and Ni-Al-O were approximately 1000 HV and 1500 HV, respectively. Therefore, the most vulnerable position is expected to be the interfacial boundary between the external oxide and internal oxide, and this resulted in the ease of exfoliation of the external oxide in this location, by exposing the Ni-Al-O oxide to the surface in the coarse grain at 980 o C. The current work can be a useful method in the design of Ni-based superalloys by controlling the grain size of the components.

Effect of trace impurity elements on the high-temperature oxidation resistance of a high-purity nickel-based superalloy

The Effects of Alloying Elements Cr, Al, and Si on Oxidation Behaviors of Ni-Based Superalloys

The synergy effect of elements on the oxidation resistance of a high-purity directionally solidification nickel-based superalloy

Effect of elements distribution on oxidation behavior of a nickel-based single crystal superalloy

The effect of tensile stress on oxidation behavior of nickel-base single crystal superalloy

High-temperature oxidation behaviors and mechanisms in newly designed L1 2 -strengthened high-entropy alloys

Effects of Ni and Cr on the high-temperature oxidation behavior and mechanisms of Co- and CoNi-base superalloys

Effect of High Temperature Oxidation on Creep Behavior of Ni-Based Single Crystal Superalloy

Effect of Yttrium Additions on the High-Temperature Oxidation Behavior of GH4169 Ni-Based Superalloy

High temperature oxidation behavior and mechanism of a new Ni-Co-based superalloy

Oxidation behavior of a nickel-based single crystal superalloy at 1100 °C under different oxygen concentration

Diffusion of alloying elements during high temperature oxidation in a low-cost third generation Ni-based single crystal superalloy

Comparative study of the reactive elements effects on oxidation behavior of a Ni-based superalloy

Microstructural evolution during exposure in air and oxidation behavior of a nickel-based superalloy

Effects of Different Surface Native Pre-Oxides on the Hot Corrosion Properties of Nickel-Based Single Crystal Superalloys

Effect of Grain Size on High Temperature Oxidation Behavior of IN792 Superalloy

Effect of Molybdenum on Isothermal Oxidation Behavior of 4th Generation Nickel-Based Single Crystal Superalloys

High-temperature oxidation and hot corrosion of Ni-based single crystal superalloy in the incubation stage

The effect of amorphous coating on high temperature oxidation resistance of Ni-based single crystal superalloy

Tuning Mo/W ratio to improve high temperature oxidation resistance of single crystal nickel base superalloys

Influence of Ti addition on oxidation behavior of Ni-Cr-W-based superalloys