Abstract:The effect of different constitutive modelling choices is crucial under a high strain rate as encountered in ballistic applications. Natural fragmentation of explosively driven cylinder rings is chosen as a simplified example to describe the ability of numerical simulations to describe fractures. The main research interests are the importance of (i) material imperfections, (ii) the accuracy of fracture models vs. damage models, (iii) the plasticity algorithm (stress update), (iv) the introduction of a triaxiality cutoff criterion to the damage models, and (v) different constitutive models (plasticity and damage). Due to the complexity of the propagation and coalescense of multiple cracks in classical methods, smoothed-particle hydrodynamics (SPH) is used as a tailor-made method to discretise the model. An elasto-plasticity model, a damage model and an equation of state describe the material behaviour. The required material parameters are determined based on stress-strain curves from quasi-static and dynamic tests. The Johnson-Cook model, with and without a modification of the strain rate term, and the Rusinek-Klepaczko model are used to describe plasticity. These plasticity models are combined either with the Johnson-Cook, the Lemaitre, or the Dolinski-Rittel damage model and the Mie-Grüneisen equation of state. The numerical results show that (i) a random distribution of initial damage increases irregularity of cracks, and gives more realistic fragment shapes, (ii) a coupling of plasticity model and fracture criterion has only a small effect on the fracture behaviour, (iii) using an iterative plasticity solver has a positive effect on the fracture behaviour, although this effect is marginal, (iv) adding a triaxiality cutoff criterion to the damage models improves the predicted fragment masses in the numerical simulations significantly, and (v) good accordance between experiments and numerical simulations are found for the Dolinski-Rittel and Lemaitre damage model with both plasticity models.

Multi-stage Johnson–Cook Model for Collision Analysis: Impact Experiments and Simulations

0610 A Comparative Study on Gao-Zhang and Johnson-Cook Constitutive Models

Identification of material parameters at high strain rates using ballistic impact tests and inverse finite element analysis

A modified Holmquist‒Johnson‒Cook (HJC) constitutive model and its application to numerical simulations of explosions and impacts in rock materials

Numerical analysis of Johnson-Cook damage model parameters effects on the cutting simulation of AISI 1045

Investigations on the Johnson-Cook Constitutive and Damage-Fracture Model Parameters of a Q345C Steel

Simulation of Hard-Soft Material Interaction under Impact Loading Employing the Material Point Method

Determination of the Johnson-Cook Constitutive Model Parameters of Materials by Cluster Global Optimization Algorithm

A modified Johnson-Cook model considering strain softening of A356 alloy

A method of reverse and revision of material mechanics performance parameters for vehicle collision simulation

Modified Johnson-Cook Constitutive Model for Dynamic Compressive Behaviors of C250 Maraging Steel at Different Temperatures

Separate Calibration of Johnson–Cook Model for Static and Dynamic Compression of a DNAN-Based Melt-Cast Explosive

A modified parallel-sided shear zone model for determining material constitutive law

An Enhanced Johnson–Cook Model for Hot Compressed A356 Aluminum Alloy

Optimal prediction and validation of Johnson-Cook failure model for Al 6061 using genetic algorithm

A Practical Inverse Identification of Johnson–Cook Parameters at Intermediate Strain Rates Using Split Hopkinson Pressure Bar Test

Multi-Scale Experimental Characterization for LS-DYNA MAT213 Modeling of Composite Structures under High Strain Rate

Investigation of acoustic-plastic constitutive modeling based on Johnson–Cook model and numerical simulation application

Method of Finite Element Model Updating for Identifying the Parameters of Modified Johnson–Cook Constitutive Equation

Comparative Study on High Strain Rate Fracture Modelling Using the Application of Explosively Driven Cylinder Rings

Optimal Calibration of Q235B Steel Johnson-Cook Model Parameters Based on Global Response Surface Algorithm