Abstract:Constitutive models play a significant role in understanding the deformation behavior of materials and in optimizing the manufacturing process. In order to improve the reliability of calculation results, the high temperature flow behavior of TA31 titanium alloy obtained from an annealed hot-rolled plate has been investigated by a Gleeble-3500 thermo-mechanical simulator. The isothermal hot compression tests are conducted in the temperature range of 850 to 1050 °C and the strain rate range from 0.001 to 10 s−1 with a height reduction of 60%. The annealed TA31 shows a dynamic recovery characteristic during thermo-mechanical processing. The experimental data have been used to develop an Arrhenius-type constitutive model and a modified Johnson–Cook model under the consideration of coupling effect on strain, temperature, and strain rate, as well as the strain-softening phenomenon. The material parameters are determined by a global optimization method based on the initial values by means of a regression method. A comparation of the predicted results has been performed based on the modified Johnson–Cook model and those acquired from the Arrhenius-type model. The correlation coefficient and average absolute relative error of the modified Johnson–Cook model are 4.57% and 0.9945, respectively. However, when the optimization method has been applied, they are 15.77% and 0.9620 for the Arrhenius-type model, respectively. These results indicate that the modified Johnson–Cook model is more accurate and efficient in predicting the flow stress of annealed TA31 titanium alloy under a set of model material parameters. Furthermore, the simple mathematical expression of this model is helpful to incorporate it into the finite element software to obtain detailed and valuable information during the thermo-mechanical processing simulation for TA31 in further work.

Method of Finite Element Model Updating for Identifying the Parameters of Modified Johnson–Cook Constitutive Equation

Finite Element Simulation Of High-Speed Cutting Alloy Cast Iron

Finite Element Model of Milling Process Sequence for Frame Monolithic Components

A modified parallel-sided shear zone model for determining material constitutive law

Determination of the Johnson-Cook Constitutive Model Parameters of Materials by Cluster Global Optimization Algorithm

Development of A Material Constitutive for High-Rate Using A Combined Experiment/Computation Method

OPTIMIZATION OF JOHNSON-COOK CONSTITUTIVE MODEL PARAMETERS

The Role of Material Model in the Finite Element Simulation of High-Speed Machining of Ti6Al4V

Determination and Verification of the Johnson–Cook Constitutive Model Parameters in the Precision Machining of Ti6Al4V Alloy

Finite element simulations of Ti6Al4V titanium alloy machining to assess material model parameters of the Johnson-Cook constitutive equation

Modified Johnson-Cook Constitutive Model for Dynamic Compressive Behaviors of C250 Maraging Steel at Different Temperatures

0610 A Comparative Study on Gao-Zhang and Johnson-Cook Constitutive Models

Optimization of Milling Aluminum Alloy 6061-T6 using Modified Johnson-Cook Model

Parameter identification of Johnson-Cook constitutive model based on genetic algorithm and simulation analysis for 304 stainless steel

Subroutine Embedding and Finite Element Simulation of the Improved Constitutive Equation for Ti6Al4V during High-Speed Machining

A Modified Johnson–Cook Model for Modeling AA6061-T6 under Different Temperatures Considering Ductile Fracture

Inverse determination of improved constitutive equation for cutting titanium alloy Ti-6Al-4V based on finite element analysis

Research on Parameter Identification of Johnson–Cook Constitutive Model for TC17 Titanium Alloy Cutting Simulation

The Comparation of Arrhenius-Type and Modified Johnson–Cook Constitutive Models at Elevated Temperature for Annealed TA31 Titanium Alloy

Calibration of constitutive models using genetic algorithms

Parametric Analysis and Improvement of the Johnson-Cook Model for a TC4 Titanium Alloy