Abstract:Establishing a material constitutive model reflecting the mechanical behavior of metal materials in the cutting process is the basis of cutting finite element simulation, and has an important guiding role in accurately describing the cutting thermo-mechanical coupling state variables and further optimizing process parameters. This paper proposes a reverse identification method of material constitutive parameters based on co-simulation. The influence of mass scaling factor, mesh size, and Johnson-Cook (J-C) constitutive parameters on cutting force was analyzed, and orthogonal cutting experiments were carried out for two difficult-to-machine materials, die steel H13 and titanium alloy Ti-6Al-4V. ABAQUS is redeveloped based on Python, and then the J-C constitutive parameters are directly optimized for the first time with the minimum error between the finite element simulation value and the experimental value of the cutting force as the objective function, the least square identification of J-C constitutive parameters based on co-simulation is realized by combining genetic algorithm. The results show that the reasonable setting of mass scaling factor and mesh size can significantly reduce the time of simulation calculation and improve the optimization efficiency of constitutive parameters. The yield stress, hardening coefficient, strain rate coefficient, hardening coefficient and softening coefficient of materials have different effects on cutting force, which is the key to effective inverse identification of constitutive parameters. Compared with different J-C parameters reported in the literature, it is found that the constitutive parameters obtained by inverse identification based on co-simulation are more accurate, and the prediction of residual stress and serrated chip characteristics also has good accuracy. This study provides a reference for the optimization of constitutive parameters, and the research results provide a new scheme for the efficient construction of material mechanical behavior required for cutting finite element simulation.

OPTIMIZATION OF JOHNSON-COOK CONSTITUTIVE MODEL PARAMETERS

Parameters Optimization of Tailor Welded Blank Forming Process

Determination and Verification of the Johnson–Cook Constitutive Model Parameters in the Precision Machining of Ti6Al4V Alloy

A modified parallel-sided shear zone model for determining material constitutive law

Determination of the Johnson-Cook Constitutive Model Parameters of Materials by Cluster Global Optimization Algorithm

Method of Finite Element Model Updating for Identifying the Parameters of Modified Johnson–Cook Constitutive Equation

Parameter identification of Johnson-Cook constitutive model based on genetic algorithm and simulation analysis for 304 stainless steel

Research on inverse identification of Johnson-Cook constitutive parameters for turning 304 stainless steel based on coupling simulation

Optimization of Milling Aluminum Alloy 6061-T6 using Modified Johnson-Cook Model

0610 A Comparative Study on Gao-Zhang and Johnson-Cook Constitutive Models

Numerical analysis of Johnson-Cook damage model parameters effects on the cutting simulation of AISI 1045

Pareto Fronts of Machining Parameters for Trade-off among Energy Consumption, Cutting Force and Processing Time

Determination of Material Constitutive Laws for Inconel 718 Superalloy Under Different Strain Rates and Working Temperatures

Evaluation of constitutive models used in orthogonal cutting simulation based on coupled Eulerian–Lagrangian formulation

Research on Parameter Identification of Johnson–Cook Constitutive Model for TC17 Titanium Alloy Cutting Simulation

A Modified Johnson–Cook Constitutive Model and Its Application to High Speed Machining of 7050-T7451 Aluminum Alloy

Finite element simulations of Ti6Al4V titanium alloy machining to assess material model parameters of the Johnson-Cook constitutive equation

Identification of Multiple Parameters of the Bammann–Chiesa–Johnson Constitutive Model with Comprehensive Experiments for Pure Aluminum

Optimized Modeling Strategies for the Parametrization of a Two-Parameter Friction Model Through Inverse Modeling of Conical Tube-Upsetting Tests

Inverse identification of material constitutive parameters based on co-simulation

Calibration of constitutive models using genetic algorithms