Abstract:Brazed monolayer diamond grinding wheels have advantages of a high abrasive bonding strength, high protrusion, and a large chip disposal space. However, it is difficult to prepare ordered and fine-grained brazed diamond grinding wheels. This study presents a new method for grain-arranged, brazed diamond grinding wheels with microtextures with similar performance to ordered and fine-grained brazed diamond grinding wheels. First, coarse diamond grains (18/20 mesh) were orderly brazed to fabricate the end grinding wheels. Next, a series of microtextures were ablated on the diamond grains using a pulsed laser, and two types of textured end grinding wheels-TG-G (ablated microgrooves only) and TG-GH (ablated microgrooves and microholes)-were prepared. Then, an experiment involving the grinding of alumina ceramics was performed, and the grinding characteristics and grinding mechanism were analyzed. The results indicated that compared with untextured diamond end grinding wheels (TG), the textured diamond grinding wheels (TG-G and TG-GH) significantly reduced the grinding force and the roughness of the machined surface. The local stress concentration at the microtextures promoted the formation of microcracks in the diamond grains of TG-G and TG-GH, and the self-sharpness of the grinding wheel was significantly improved. The brittle fracture mode of ceramic materials in grinding included intergranular fracture and transgranular fracture. Ironing pressure action was a key material-removal mechanism. It had an important influence on the cutting force and plasticity characteristics of the TG machined surface. For the surfaces processed by TG-G and TG-GH, the effect of ironing was weakened, while shearing played a more important role. The TG-GH grinding wheel ablated with microgrooves and microholes was superior to the TG-G grinding wheel ablated with only microgrooves, with regard to the grinding force, roughness, and self-sharpening.

Superhard resin wheel and its preparation method for grinding hard material brittle

A study on pore-forming agent in the resin bond diamond wheel used for silicon wafer back-grinding

Study on the Resin Bond Diamond Grinding Wheel Used for Ultra-Precision Back Grinding Silicon Wafer

Development of a Phenolic Resin-Bonded CBN Wheel for Precision Grinding of Ferrous Materials

Influence of pore-forming agent on the performance of resin bond diamond grinding wheel in back-grinding silicon wafers

Grinding of alumina ceramic with microtextured brazed diamond end grinding wheels

Digital design and performance evaluation of porous metal-bonded grinding wheels based on minimal surface and 3D printing

Manufacture and Grinding Performance of A Polyimide Resin-Bonded Cbn Wheel for Precision Grinding of Ferrous Materials

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Diamond parameter design and assessment of a novel 3D printed diamond grinding wheel with linear cooling channels

Effects of open pores on grinding performance of porous metal-bonded aggregated cBN wheels during grinding Ti–6Al–4V alloys

Pore morphology design and grinding performance evaluation of porous grinding wheel made by additive manufacturing

Ultra-precision Machining of Hard and Brittle Materials with Coarse-Grained Grinding Wheels

Preparation and Grinding Performance of Polyimide Resin Bonded Cubic Boron Nitride Composite Grinding Wheels

On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel

Stereolithography 3D printing gyroid triply periodic minimal surface vitrified bond diamond grinding wheel

Fabrication of Vitrified Bond Diamond Grinding Wheel via LCD Photopolymerization

Highly porous or highly structured tool — the choice for high-performance defect-free grinding

Optimal Design and Performance Evaluation of Grinding Wheels with Triply Periodic Minimal Surface Lattice Structure

Diamond grinding wheel with graphene oxide

Grinding damage of BK7 using copper-resin bond coarse-grained diamond wheel