Abstract:Particle-reinforced titanium matrix composites (PTMCs), as a new type of lightweight high-temperature structural materials, have a broad application prospect in aerospace and advanced automotive fields, owing to their excellent fatigue-resistance ability, as well as high-temperature toughness and hardness properties. Grinding with cubic boron nitride (CBN) superhard abrasive wheels plays a continuous growth role in achieving high-efficiency ultimate precision, and desired surface quality of components. However, high grinding temperatures, fast tool wear, and numerous machining defects appear during conventional grinding (CG) processes due to the presence of reinforcement phases within PTMCs. In this paper, a radial ultrasonic vibration–assisted grinding (RUVAG) equipment is proposed and fabricated to achieve the reduction of tool wears and high machined surface quality. Results show that radial ultrasonic vibrating amplitudes have great influences on material removal mechanism and abrasive wear properties. When the amplitude reaches 5 μm, the synergistic removal of reinforcement phases (i.e., TiC particles and TiB short fibers) and Ti–6Al–4 V matrix materials was achieved in terms of micro-fracture morphology of grains, machined surface defects, and evolutions of average pile-up ratio after employing radial ultrasonic vibrations into CG processes. Meanwhile, the normal grinding force was increased by 5.1–14.8% and the grinding temperature was reduced by 37.2% under the RUVAG process, resulting from the radial hammering action and interrupted cutting state between workpiece and grains. Additionally, radial ultrasonic vibration facilitates the transverse expansion of cracks within the reinforcing particles and promotes microfracture behavior, leading to a significant reduction in surface defects. This study helps to promote the engineering application of PTMCs, and also provides a practical reference and theoretical basis for realizing high quality and efficient processing of other difficult-to-machine materials.

Effects of open pores on grinding performance of porous metal-bonded aggregated cBN wheels during grinding Ti–6Al–4V alloys

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Grain erosion wear properties and grinding performance of porous aggregated cubic boron nitride abrasive wheels

On the tribology and grinding performance of graphene-modified porous composite-bonded CBN wheel

Pore morphology design and grinding performance evaluation of porous grinding wheel made by additive manufacturing

Micro-fracture behavior of a single-aggregated cBN grain and its relation to material removal in high-speed grinding of Ti–6Al–4V alloys

Effect of grain contents of a single-aggregated cubic boron nitride grain on material removal mechanism during Ti–6Al–4V alloy grinding

CBN grain wear and its effects on material removal during grinding of FGH96 powder metallurgy superalloy

Grinding Performance Evaluation of 3D-Printed Porous Metal-Bonded Grinding Wheel in BK7 Glass Grinding

Grinding of alumina ceramic with microtextured brazed diamond end grinding wheels

Grinding performance integrated experimental evaluation on alumina ceramics with leaf-vein bionic grinding wheel

Relationship between the properties and porosity of metal bond sintering grinding tools

No-impact trajectory design and fabrication of surface structured CBN grinding wheel by laser cladding remelting method

On the Grinding Performance of Alumina Wheels in Ultrasonic Vibration–assisted Grinding of Hardened GCr15 Steel

Boron Oxide on the Surface of Grains from Superhard Materials as a Possible Factor Increasing the Performance Characteristics of Grinding Tools

Digital design and performance evaluation of porous metal-bonded grinding wheels based on minimal surface and 3D printing

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Optimal Design and Performance Evaluation of Grinding Wheels with Triply Periodic Minimal Surface Lattice Structure

Stress Characteristics and Fracture Wear of Brazed CBN Grains in Monolayer Grinding Wheels

Effect of radial ultrasonic vibrations on wear properties of CBN grains in high-speed grinding of PTMCs

Influence of Electroplated CBN Wheel Wear on Grinding Surface Morphology of Powder Metallurgy Superalloy FGH96