Abstract:Advanced high strength steels have excellent strength-to-weight ratio and are widely used for automotive and structural applications. Grinding is commonly used as a final machining process for these materials to achieve the required dimensional tolerance and surface quality. In this work, the grindability of as-received microstructure of ferrite-pearlite and in-house developed ferrite-bainite-martensite steels using polycrystalline white fused alumina and microcrystalline sol-gel alumina grinding wheels under flood and minimum quantity lubrication conditions is studied. Grindability of these steels was evaluated based on the wheel wear, grinding forces, force ratio, specific cutting energy, surface roughness (R a ), and surface morphology. The sol-gel alumina wheel was observed with higher wear flat area and forces under all the grinding conditions as compared with white fused alumina wheel. The white fused alumina wheel exhibited higher force ratio values for all the grinding conditions than the sol-gel alumina wheel. The energy required per unit volume of material removal is lower for the white fused alumina wheel in both the steels under flood and minimum quantity lubrication conditions. This is due to the retention of sharpness of abrasive grains by self-sharpening for white fused alumina wheel than the sol-gel alumina. The presence of fractured, melted, and hollow chips on the ferrite-pearlite and ferrite-bainite-martensite steels under both the grinding condition confirms the change in material removal mechanism with the presence of higher wear flat area of the sol-gel alumina wheel. Based on the obtained results, the white fused alumina wheel was found to be a suitable grinding wheel for grinding of both the steels under all grinding conditions compared to the sol-gel alumina wheel.

Highly porous or highly structured tool — the choice for high-performance defect-free grinding

Optimal Design and Performance Evaluation of Grinding Wheels with Triply Periodic Minimal Surface Lattice Structure

Grooving and Grinding Performance of Structured Wheels Fabricated with Diamond Cutting Blades

Pore morphology design and grinding performance evaluation of porous grinding wheel made by additive manufacturing

Characterization of High-Speed Alumina Abrasive Grinding Wheel

Study on the Additively Manufactured Porous Metal-Bonded Grinding Wheel Designed by Octahedron Lattice Structure

Porous Structure Design and Fabrication of Metal-Bonded Diamond Grinding Wheel Based on Selective Laser Melting (SLM)

Grinding Performance Evaluation of 3D-Printed Porous Metal-Bonded Grinding Wheel in BK7 Glass Grinding

A Study on Grinding Brittle Material with Pattern-Dressed Wheel

Development of discontinuous grinding wheel with multi-porous grooves

Effects of open pores on grinding performance of porous metal-bonded aggregated cBN wheels during grinding Ti–6Al–4V alloys

Nanostructured grinding wheels for ultra-precision engineering applications

Relationship between the properties and porosity of metal bond sintering grinding tools

Superhard resin wheel and its preparation method for grinding hard material brittle

Structure and Properties of Bakelite Bonded Grinding Wheels

Digital design and performance evaluation of porous metal-bonded grinding wheels based on minimal surface and 3D printing

The effect of porosity of CBN grinding tools on grinding properties

Grinding performance evaluation of SiC ceramic by bird feather-like structure diamond grinding wheel

Self-sharpening property of porous metal-bonded aggregated cBN wheels during the grinding of Ti–6Al–4V alloys

Investigation of Cutting Mechanism and Residual Stress State with Grooved Grinding Wheels

Grindability studies of thermomechanically processed advanced high strength steel using sol-gel and fused alumina grain-based grinding wheels