Abstract:The structured grinding wheels have a specially designed macro or microstructure on the surface, with a relatively low average grinding force and temperature in the cutting zone and more space for chips and coolant. Most traditional grinding wheel fabrication methods, such as electroplating, sintering, and brazing, have the problems of poor abrasive grain holding strength, random abrasive distribution, or thermal deformation of the substrate. To address this, laser cladding remelting technology is introduced to fabricate the structured CBN grinding wheel. A no-impact trajectory was designed on the substrate of the grinding wheel, which can reduce the fluid friction in the channel and increase the fluid pressure at the outlet. The temperature and velocity fields of the grinding process were simulated to verify the feasibility of the designed structure theoretically. The optimal process parameters for the bonding among the metal bond, the abrasive grains, and the substrate were determined by orthogonal and full-scale factorial experiments. The chemical metallurgical reactions between CBN grain and metal bond, as well as between the metal bond and substrate, were formed, increasing the holding force of CBN grains. The method can realize the fabrication of high-strength and long-life structured grinding wheels with an orderly arrangement of abrasive grains. The micro-mechanism of fabrication was analyzed using element distribution measurement and XRD analysis.

Porous Structure Design and Fabrication of Metal-Bonded Diamond Grinding Wheel Based on Selective Laser Melting (SLM)

The Effect of Porosity on the Mechanical Property of Metal-Bonded Diamond Grinding Wheel Fabricated by Selective Laser Melting (SLM)

Study on process and manufacturability of metal-bonded diamond grinding wheel fabricated by selective laser melting (SLM)

Study on the Additively Manufactured Porous Metal-Bonded Grinding Wheel Designed by Octahedron Lattice Structure

Permeability design and assessment of the additively manufactured metal-bonded diamond grinding wheel based on TPMS structures

Pore morphology design and grinding performance evaluation of porous grinding wheel made by additive manufacturing

Influence of diamond wheel grinding process on surface micro-topography and properties of SiO2/SiO2 composite

Study on formability, mechanical property and finite element modeling of 3D-printed composite for metal-bonded diamond grinding wheel application

Digital design and performance evaluation of porous metal-bonded grinding wheels based on minimal surface and 3D printing

Stereolithography 3D printing gyroid triply periodic minimal surface vitrified bond diamond grinding wheel

The Fabrication of Porous Metal-Bonded Diamond Coatings Based on Low-Pressure Cold Spraying and Ni-Al Diffusion-Reaction

Optimal Design and Performance Evaluation of Grinding Wheels with Triply Periodic Minimal Surface Lattice Structure

Grinding Performance Evaluation of 3D-Printed Porous Metal-Bonded Grinding Wheel in BK7 Glass Grinding

Diamond parameter design and assessment of a novel 3D printed diamond grinding wheel with linear cooling channels

Research on the bonding properties of vitrified bonds with porous diamonds and the grinding performance of porous diamond abrasive tools

Effects of open pores on grinding performance of porous metal-bonded aggregated cBN wheels during grinding Ti–6Al–4V alloys

Grinding performance evaluation of SiC ceramic by bird feather-like structure diamond grinding wheel

Simulation, forming process and mechanical property of Cu-Sn-Ti/diamond composites fabricated by selective laser melting

The mechanisms of high-efficiency grinding for micro/meso-structural arrays on ceramic moulds through an innovative wheel truing technology

The Effect of Diamond Grain Size on the Formability and Mechanical Property of 3D-Printed Diamond Tool

No-impact trajectory design and fabrication of surface structured CBN grinding wheel by laser cladding remelting method