Abstract:Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, Ahead of Print. Diamond abrasive tools play an important role in efficient and precision machining of difficult-to-cut materials. As the traditional tool manufacturing process is difficult to meet the integrated molding preparation of complex structures, the use of selective laser melting (SLM) technology to manufacture diamond tools with functions and structures has become a research hotspot in recent years. In this paper, the feasibility and wear characteristics of diamond bits prepared by SLM using AlSi7Mg as metal matrix are investigated. The optimal parameter combination of diamond/AlSi7Mg mixture was obtained through orthogonal experiments, in which the powder layer thickness was 30 μm, the laser power was 300 W, the scanning speed was 3000 mm/s, and the scanning spacing was 120 μm. This parameter combination realized the improvement of the mechanical properties and the decrease of the porosity. Two types of bits with and without groove-structure (Labeled as Bit-G and Bit-N) were fabricated and their drilling performance were compared by processing BK7 optical glass. The results show that the Bit-G has more excellent machining performance, including lower drilling force, better hole quality and longer service life. According to the simulation results, the self-sharpening cycle of the Bit-G's wear characteristics can be attributed to the groove structure that allows the coolant to be fully utilized in the bit/workpiece contacting area. This paper demonstrates the feasibility of the SLM process for the preparation of diamond tools and comprehensively analyzes the wear process, which provides reference value for further research on this process for the manufacturing of diamond abrasive tools.

The Effect of Diamond Grain Size on the Formability and Mechanical Property of 3D-Printed Diamond Tool

The influence of diamond content on the formability and mechanical properties of additively manufactured metal-bonded diamond tools

Effect of Components on Mechanical Properties of Fe-matrix Bonding Diamond Tool

Study on formability, mechanical property and finite element modeling of 3D-printed composite for metal-bonded diamond grinding wheel application

The Effect of Porosity on the Mechanical Property of Metal-Bonded Diamond Grinding Wheel Fabricated by Selective Laser Melting (SLM)

Study on process and manufacturability of metal-bonded diamond grinding wheel fabricated by selective laser melting (SLM)

Porous Structure Design and Fabrication of Metal-Bonded Diamond Grinding Wheel Based on Selective Laser Melting (SLM)

Influence of diamond parameters on microstructure and properties of copper-based diamond composites manufactured by Fused Deposition Modeling and Sintering (FDMS)

High-strength and wear-resistant Co-Cr-Mo/diamond composites fabricated by selective laser melting

Fabricating diamond bit by selective laser melting and its drilling performance evaluation

Simulation, forming process and mechanical property of Cu-Sn-Ti/diamond composites fabricated by selective laser melting

Effect of Tih2 Addition Amounts on the Microstructures and Properties of Porous Cu-Sn-Ti Diamond Tools

Mechanical Alloying of Copper- or Iron-Based Metallic Binders for Diamond Tools

Effects of Particle Size and Solid Loading on Stereolithography for Preparation of Diamond-Based Composites

Fabrication and performance evaluation of metal bond diamond tools based on aluminothermic reaction

Influence of the powder metallurgy route on the mechanical properties of Cu–Cr–diamond composites

Diamond parameter design and assessment of a novel 3D printed diamond grinding wheel with linear cooling channels

Cu-induced enhancement of interfacial bonding for brazed diamond grits with NiCr filler alloys

Machinability performance and mechanism in milling of additive manufactured Ti6Al4V with polycrystalline diamond tool

Effect of diamond grain size on mechanical properties and cutting performance of PCD tool in milling of C f /SiC composites

Microstructure, grain and nanowire growth during selective laser melting of Ag–Cu/diamond composites