Abstract:Herein, the fabrication of metal bond diamond tools is proposed by using the Fe2O3-Al aluminothermic reaction. Moreover, the influence of sintering temperature and TiH2- and Si-doping on phase composition and mechanical properties of the reactive sintered bond is investigated. Furthermore, the grinding performance of metal bond diamond tool on ceramic tile is also examined. At 930 °C, the sintered bond is composed of Fe, Al2O3, Fe3O4 and FeO phases. However, the aluminothermic reaction initiated at 1028.8 °C and resulted in the formation of FeAl2O4 and Fe3Al phases. Moreover, the content of Al2O3, Fe3Al, α-Fe and FeAl2O4 phases increased with the increase of sintering temperature. The maximum flexural strength, hardness and relative density are achieved when sintering at 1230 °C. In addition, the dehydrogenation of TiH2 can impede the formation of FeAl2O4 phases and improve the flexural strength, hardness and relative density of the bond. Also, the Si-doping into Fe2O3-Al aluminothermic reaction system resulted in Fe2Al3Si3 phase and reduced the content of Al2O3 and Fe3Al phases, leading to higher flexural strength, lower hardness and inferior relative density. In wet grinding, the as-prepared metal bond diamond tool can be used to grind ceramic tiles with lower grinding force and better surface quality than the dry grinding. However, the as-prepared metal bond diamond tool rendered low wear resistance due to the brittle nature of the metal bond.

Effect of Components on Mechanical Properties of Fe-matrix Bonding Diamond Tool

Effect of Fe: Cu ratio on microstructure and mechanical properties of Fe-Co-Cu-based diamond tools

Influence of the powder metallurgy route on the mechanical properties of Cu–Cr–diamond composites

Preparation and performance of high entropy alloy reinforced Cu-based bond diamond tool

Cu-induced enhancement of interfacial bonding for brazed diamond grits with NiCr filler alloys

Fabrication and evaluation of high-entropy alloy reinforced Fe bond diamond tool

Fabrication and performance evaluation of metal bond diamond tools based on aluminothermic reaction

Relationship between the properties and porosity of metal bond sintering grinding tools

Effects of Process Parameters on Microstructure and Properties of TiC Reinforced Cu-Matrix Composites

Microstructure and performance of glass fiber metal composite-bonded diamond segment with Cu-Sn-Ti alloy

Investigating the effect of WC reinforcements in Cu Ti composite filler on the microstructural evolution and mechanical characteristics in brazing C f /SiC and GH3536

Mechanical Alloying of Copper- or Iron-Based Metallic Binders for Diamond Tools

Influence of diamond parameters on microstructure and properties of copper-based diamond composites manufactured by Fused Deposition Modeling and Sintering (FDMS)

Vitrified Metal Composite Bond for Diamond Grinding Tools Used for Silicon Carbide Wafer Thinning

The influence of components on the high‐temperature performance and cutting performance of Si3N4‐based ceramic tools

Effects of milling time and sintering temperature on the mechanical properties of 8 wt% WC/AlCoCrFeNiTi 0.5 high entropy alloy matrix composite

Strengthening Mechanisms and Retention Properties of Sintered Iron-Based Matrix Material for Metallic-Diamond Tools

Improvement in Hardness and Wear Behaviour of Iron-Based Mn–Cu–Sn Matrix for Sintered Diamond Tools by Dispersion Strengthening

Experimental research on the welding strength of PCBN and cemented carbide materials for cutting tools application

Optimisation of sintering parameters for bonding nanocrystalline cemented tungsten carbide powder and solid high strength steel

Study on the Microstructure and Mechanical Properties of Diamond Particle-Reinforced Copper-Iron Sandwich Composites Prepared by Powder Metallurgy