Flexural failure of the unrestrained segment for sleeved compression struts with pinned ends

Hai-Rong Shi,Ying Chen,Chun-Lin Wang,Bin Zeng

DOI: https://doi.org/10.1016/j.tws.2022.110462

2022-12-22

Abstract:Confining with an outer sleeve is an effective means of enhancing the load-bearing and deformation capacity of compression struts. The outer sleeve and compression strut, i.e., inner core, constitute a sleeved core-loaded member, where the latter ideally bears all the axial compression under the lateral restraint of the former. Additionally, an extension segment of the inner core is typically required as the allowance for contraction. However, the unrestrained extension segment is prone to excess flexural deformation, dramatically decreasing the overall load carrying capacity of the sleeved member. In this paper, first, an analytical investigation of the behaviour of the sleeved member with pinned ends is presented. Second, a numerical study was conducted to determine the limit state of the localized flexural failure and to propose the corresponding design criterion combining the analytical model. Last, the design criterion was further validated by compressive tests, indicating that the proposed method accurately predicted the localized​ flexural failure of both seamless-sleeved members and members with assembled outer sleeves.

engineering, mechanical,mechanics, civil