Abstract:The buckling of compression members in space structures leads to the local collapse or even progressive collapse of structures. This paper proposed an assembled outer sleeve to reinforce the compression member of space structures by restraining its buckling. The assembled outer sleeve was composed of two identical semicircular anchor plates using high-strength bolts. The compression member to be strengthened does not need to be reformed directly. The mechanical properties of a compression member strengthened by an assembled outer sleeve were studied through axial compression tests involving eight specimens. The ultimate bearing capacity of a compression member strengthened by an assembled outer sleeve increased by more than 68.6%. When the wall thickness of the assembled outer sleeve was larger and the length of the unrestrained segment for the compression member was shorter, the ultimate bearing capacity of the specimens was higher. The installation direction of the assembled outer sleeve had no noticeable effect on the mechanical properties of the specimen. Furthermore, failure modes of the compression member strengthened by the assembled outer sleeve were proposed. The failure modes included the global buckling of the specimen, local buckling of the unrestrained segment for the compression member, and the coupled buckling (including global buckling and local buckling). When the wall thickness of the assembled outer sleeve was thin, global buckling was more likely to occur. Moreover, when the unrestrained segment for the compression member was long, local buckling was more likely to occur. Compared with the unreinforced compression member, the ductility coefficient of the compression member strengthened by the assembled outer sleeve enhanced by more than 49.7%. Compression members strengthened with assembled outer sleeves have an excellent post-yield axial deformation capability.

Overall stability analysis of compression struts strengthened with bolted built-up outer casings

Experimental Investigation into Flexural Buckling of Double-Limb Built-Up Plate Members under Compression

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Buckling of Flexural-Shear Bracing System and Its Braced Steel Frames

Test on shear behavior of less-tightened high-strength bolted connections

Experimental study and performance evaluation of compression members in space structures strengthened with assembled outer sleeves

Subassemblage Tests and Numerical Analyses of Buckling-Restrained Braces under Pre-Compression

Subassemblage Tests and Design of Steel Channels Assembled Buckling-Restrained Braces

Design method and experimental investigation of compression members in a space structure strengthened by folded sleeves

A study on the stability bearing capacity of fastener-style tubular steel formwork-supports

Global Buckling Behavior of CFST Columns with Assembling Errors

Flexural failure of the unrestrained segment for sleeved compression struts with pinned ends

Global Buckling of S35657 Austenitic Stainless Steel Welded Box- and I-section Long Columns under Axial Compression

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Overall Stability Design of L-shaped Batten-connected Multi-cell Concrete-filled Steel Tube Columns under Axial Compression

Experimental study and FEM analysis on mechanical behavior of a steel tubular joint with bolted connection subject to biaxial compression

Buckling of built-up compression members in the plane of the connectors

Study on Failure Mechanism and End Construction Influences of Double Rectangular Tube Assembled Buckling-Restrained Brace

Buckling analysis and experimental study of simply-supported single-corrugation steel plates subjected to compression

Static performance of slidable bolt-assembly truss-to-column connection with oversized bolt holes

Stability Design of Axially Loaded Stringer-Stiffened Moderately-Thick Cylindrical Shells in Steel Tubular Transmission Towers