Abstract:Thin-walled cold-formed steel (CFS) structures are widely used in low-storey buildings and are seeing increased applications in multi-storey buildings as well as long-span structures. The bolted connection is one of the most common types of fasteners employed in CFS structures. The bolt slippage and load-bearing mechanism in CFS connections have a significant influence on the structural behaviour of cold-formed steel construction assemblies, which are typically numerically simulated using spring/connector elements. However, the determination of input parameters for the spring/connector elements generally requires load-deformation characteristics obtained from physical tests of lap joints, which are costly and time-consuming. Moreover, the use of spring/connector elements fails to explicitly capture the bolt bearing behaviour, resulting in inaccuracy in the simulation of CFS connections. In this paper, an accurate, efficient and robust numerical method that can fully replicate the behaviour of CFS connections considering both the effects of bolt slippage and bearing has been introduced. In the proposed numerical methodology, the cold-formed plates are modelled using the conventional shell elements, while a number of solid elements are introduced around the bolt holes, enabling the bolt-plate interaction to be explicitly accounted for, with contact pairs defined between the bolts and their surrounding solid element surfaces. The proposed numerical method could find a convergence solution using dynamic implicit solver in the general-purpose finite element (FE) software ABAQUS. Good agreement between the FE models using the proposed method and the available test results of CFS bolted connections were achieved, which sheds light on the promising application of the proposed method for simulating CFS assembled using bolted connections.

Static performance of slidable bolt-assembly truss-to-column connection with oversized bolt holes

Tensile Behavior of Novel Column-to-column Connection for Modular Steel Construction Using High-Strength Bolts

Mechanical Behavior of Loose High-Strength Bolted Connections with Thin Sheet Steels

Experimental Study of Shear Behavior of Anchor Bolt Connections at Steel Column Bases

Test on shear behavior of less-tightened high-strength bolted connections

EXPERIMENTAL STUDY ON THE SEISMIC BEHAVIOR OF CFST RECTANGULAR COLUMN TO H-SECTION STEEL BEAM CONNECTIONS WITH EXTERNAL STIFFENERS

Shear Behavior of Exposed Steel Column Base Joint

Seismic performance of bolted connection between T-shaped section column and I-section beam with L-stubs

Seismic performance of H-section beam to HSS column connection in prefabricated structures

Bending-shear performance of column-to-column bolted-flange connections in prefabricated multi-high-rise steel structures

An Improved and Robust Finite Element Model for Simulation of Thin-Walled Steel Bolted Connections

Seismic performance of bolted double-web T-stub connections with T-shaped steel column

Static Bearing Capacity Investigation of a Novel Prefabricated Light-Steel Beam–Column Connection

Seismic performance of welded-bolted joint between double channel beam and CFST column

Experimental analysis of the truss-to-column connection in a modularized prefabricated steel structure

Axial resistant behavior of bolt-connected CFST columns: Experimental and numerical studies

s Tensile behaviour of T-stub to hollow section column using elliptical-head one-side bolts

Experimental Study on Blind Bolted Connections to Concrete-Filled Stainless Steel Columns

Hysteretic behavior of CFST column-steel beam bolted joints with external reinforcing diaphragm

Compressive behavior of bolted built-up H-section column using high-strength steel

Seismic performance analysis of steel beam to CFST column connection with ductility and energy dissipation components