Abstract:We develop a hybrid optofluidic microcavity by placing a microsphere with a diameter ranging from 1 to 4 μm in liquid-filled plano-plano Fabry–Perot (FP) cavities, which can provide an extremely low effective mode volume down to 0.3–5.1 μm3 while maintaining a high Q-factor up to 1×104–5×104 and a finesse of ∼2000. Compared to the pure plano-plano FP cavities that are known to suffer from the lack of mode confinement, diffraction, and geometrical walk-off losses as well as being highly susceptible to mirror misalignment, our microsphere-integrated FP (MIFP) cavities show strong optical confinement in the lateral direction with a tight mode radius of only 0.4–0.9 μm and high tolerance to mirror misalignment as large as 2°. With the microsphere serving as a waveguide, the MIFP is advantageous over a fiber-sandwiched FP cavity due to the open-cavity design for analytes/liquids to interact strongly with the resonant mode, the ease of assembly, and the possibility to replace the microsphere. In this work, the main characteristics of the MIFP, including Q-factor, finesse, effective mode radius and volume, and their dependence on the surrounding medium’s refractive index, mirror spacing, microsphere position inside the FP cavity, and mirror misalignment, are systematically investigated using a finite-element method. Then, by inserting dye-doped polystyrene microspheres of various sizes into the FP cavity filled with water, we experimentally realize single-mode MIFP optofluidic lasers that have a lasing threshold as low as a few microjoules per square millimeter and a lasing spot radius of only ∼0.5 μm. Our results suggest that the MIFP cavities provide a promising technology platform for novel photonic devices and biological/chemical detection with ultra-small detection volumes.

Optimizing scanning trajectory for laser nanoprinting of micro-optical Fabry-Perot interferometer integrated on single-mode fiber end-face for gas flow sensing

Sensitivity-enhanced Optical Sensor Based on Multilayer Coated Fabry–Pérot Interferometer

High-Q, Low-Mode-volume Microsphere-Integrated Fabry–Perot Cavity for Optofluidic Lasing Applications

Optical Fiber Based Microfluidic Gas Flowmeter

Polymer Microbubble-Based Fabry–Perot Fiber Interferometer and Sensing Applications

Compact highly sensitive Fabry-Perot temperature and gas pressure sensing probe fabricated by a femtosecond laser and PDMS

High Sensitivity Gas Refractometer Based on All-Fiber Open-Cavity Fabry–Perot Interferometer Formed by Large Lateral Offset Splicing

Optical Fiber Fabry–Pérot Interferometer Based on an Air Cavity for Gas Pressure Sensing

Hot-wire Sandwiched Fabry-Perot Interferometer for Microfluidic Flow Rate Sensing

Fiber-Optic Tip Pressure Sensor Fabricated by 157 nm Laser

Membrane-free fiber-optic Fabry-Perot gas pressure sensor with Pa-level resolution

In-line fiber optic optofluidic sensor based on a fully open Fabry-Perot interferometer

Hybrid Fabry–Perot interferometer: polymer-induced microcavity for temperature and gas pressure measurement

CO<sub>2</sub> Laser Tapering of Intrinsic Fabry-Perot Interferometers for Sensing

Microfluidic Flowmeter Based on Micro "Hot-Wire" Sandwiched Fabry-Perot Interferometer.

Optical fiber Fabry-Perot silica-microprobe for a gas pressure sensor

Micro Multicavity Fabry–Pérot Interferometers Sensor in SMFs Machined by Femtosecond Laser

High-Sensitivity Gas Pressure Sensor Based on Fabry–Pérot Interferometer with a Side-Opened Channel in Hollow-Core Photonic Bandgap Fiber

High Sensitivity Fiber Gas Pressure Sensor with Two Separated Fabry-Perot Interferometers Based on the Vernier Effect

Two-photon 3D printing optical Fabry-Perot microcavity for non-contact pressure detection