Abstract:Refractory metal carbides TiC, ZrC, HfC, NbC and TaC have excellent physical, chemical and mechanical properties as materials for ultra-high temperature ceramics. Of these, the most refractory are TaC and HfC, whose melting points approach 4000°C. It should be noted the high hardness, strength and wear resistance of refractory carbides. Hence, there is a natural interest in high-entropy carbides based on them, which are becoming an important class of new ceramic materials, since they potentially have more advanced applied properties. However, obtaining such materials by classical metallurgical methods is a difficult task. In modern research, samples of high-entropy carbides are most often synthesized using expensive special equipment (methods of plasma-spark sintering, high-energy planetary mills, etc.) and a relatively long preparation of precursors for sample production. This paper describes a new approach to the synthesis of multicomponent carbide (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C using an electrochemical process at a temperature not exceeding 1173 K. The method is based on the phenomenon of currentless metal transfer in molten salts. After the step-by-step transfer of metals, the sample was washed from the electrolyte, then sintered in a vacuum furnace. According to X-ray phase analysis, the resulting high-entropy carbide is a single-phase solid solution with an FCC structure. The diffraction pattern of the synthesized sample is in good agreement with the calculated diffraction pattern obtained by the Debye formula for a supercell of 64 000 atoms. A compact sample of high-entropy carbide was produced by pressing a tablet 10 mm in diameter with the addition of cobalt as a matrix metal. After vacuum sintering, the sample was ground to prepare for examination on a scanning electron microscope. Elemental mapping of the sample surface was performed, which showed a satisfactory distribution of metals that make up the high-entropy carbide. The measured microhardness of the sample turned out to be less than the values found in the publications of other authors, which may be due to some residual sample porosity.

Single‐Source Precursor Synthesis of a Compositionally Complex Early Transitional Metal Carbonitride (Ti,Zr,Hf,Nb,Ta)NxC1‐x

Mechanistically Guided Materials Chemistry: Synthesis of Ternary Nitrides, CaZrN 2 and CaHfN 2

Mechanistically-guided materials chemistry: synthesis of new ternary nitrides, CaZrN$_2$ and CaHfN$_2$

Ultrafast synthesis and pressureless densification of multicomponent nitride and carbonitride ceramics

Bulk Nanostructure Formation Directly From The Multicomponent Alloy Melt

High-entropy carbonitride (Hf,Ta,Nb,Zr)(C,N): One step mechanically induced self-sustaining reaction and spark plasma sintering

Nanostructured Hybrid Carbon Nanotube/UltraHigh‐Temperature Ceramic Heterostructures: Microstructure Evolution and Forming Mechanism

Understanding the electronic structure, mechanical properties, and thermodynamic stability of (TiZrHfNbTa)C combined experiments and first-principles simulation

Facile Electrochemical Synthesis of Nanoscale (TiNbTaZrHf)C High-Entropy Carbide Powder

Mechanochemically assisted synthesis of titanium carbonitride from metal and organic precursor

Structural stability, hardness, fracture toughness and wear resistance of refractory metal carbonitrides RMC1-N (RM = Zr, Nb, Hf, Ta) solid solutions from first-principles calculations

Synthesis and thermal stability of novel high-entropy metal boron carbonitride ceramic powders

Two-step solid-state synthesis of ternary nitride materials

Synthesis of high-entropy carbides (TiTaNb)xHfyZrzC with strong thermal-oxidative resistant properties by mechanical alloying and spark plasma sintering

A simple route to synthesize high-entropy carbide (Hf0.2Zr0.2Ti0.2Ce0.2La0.2)C1-δ nanoparticles with large covalent radius difference

PRODUCING METHOD OF HIGH ENTROPY CARBIDE IN AN IONIC MELT

Novel refractory high-entropy ceramics: Transition metal carbonitrides with superior ablation resistance

Accelerated Discovery of (TiZrHf)x(NbTa)1‐x High‐Entropy Alloys with Superior Thermal Stability and a New Crystallization Mechanism

Processing and Properties of High-Entropy Ultra-High Temperature Carbides

Machine-learning Driven Synthesis of TiZrNbHfTaC5 High-Entropy Carbide

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets