Abstract:High-entropy carbides are a nascent group of ceramics that are promising for high-temperature applications due to the combination of good stability, high hardness (H), high strength, and superior creep resistance that they display. Due to high melting points and low lattice diffusion coefficients, however, the high-entropy carbides are usually difficult to consolidate to a nearly full density. To cope with this challenge, herein, binary carbides including TiC, V8C7, NbC, Mo2C, and WC with different carbon stoichiometry were used to prepare dense high-entropy (TiVNbMoW)C-4.375, and the influence of carbon vacancy on formation ability and mechanical properties of carbon-deficient high-entropy (TiVNbMoW)C-4.375 were investigated. Intriguingly, although the starting binary carbides have different crystal structures and carbon stoichiometry, the as-prepared high-entropy material showed a rock-salt structure with a relatively high density (98.1%) and good mechanical properties with hardness of 19.4 +/- 0.4 GPa and fracture toughness (K-IC) of 4.02 MPa center dot m(1/2). More importantly, the high-entropy (TiVNbMoW)C4.375 exhibited low coefficient of friction (COF) at room temperature (RT) and 800 degrees C. Wear rate (W) gradually increased with the temperature rising, which were attributed to the formation of low-hardness oxidation films at high temperatures to aggravate wear. At 800 degrees C, lubricating films formed from sufficient oxidation products of V2O5 and MoO3 effectively improved tribological behavior of the high-entropy (TiVNbMoW)C-4.375. Wear mechanisms were mainly abrasive wear resulting from grain pullout and brittle fracture as well as oxidation wear generated from high-temperature reactions. These results are useful as valuable guidance and reference to the synthesis of high-entropy ceramics (HECs) for sliding parts under high-temperature serving conditions.

Synthesis and thermal stability of novel high-entropy metal boron carbonitride ceramic powders

Synthesis and Characterization of High-Purity, High-Entropy Diboride Ceramic Powders by a Liquid Phase Method

Phase stability, mechanical and thermodynamic properties of (Hf, Zr, Ta, M)B 2 (M= Nb, Ti, Cr, W) quaternary high-entropy diboride ceramics via first-principles calculations

A Facile Route for the Synthesis of High‐entropy Transition Carbides/borides at Low Temperatures

Low-temperature synthesis and mechanical performance analysis of single-phase high-entropy (Ti,Cr,V,Nb,Ta)B 1.9 ceramics

Microstructures and oxidation mechanisms of (Zr0.2Hf0.2Ta0.2Nb0.2Ti0.2)B2 high-entropy ceramic

High-Entropy Metal Diborides: A New Class of High-Entropy Materials and a New Type of Ultrahigh Temperature Ceramics

Preparation and mechanical properties of (Ti0.2Zr0.2V0.2Nb0.2Ta0.2)(C0.6N0.4)-Co high-entropy cermets

First-principles prediction, fabrication and characterization of (Hf0.2Nb0.2Ta0.2Ti0.2Zr0.2)B2 high-entropy borides

High-pressure high-temperature synthesis and thermal equation of state of high-entropy transition metal boride

Microstructures and mechanical properties of (Nb0.25Mo0.25Ta0.25W0.25)C and (Nb0.2Mo0.2Ta0.2W0.2Hf0.2)C high-entropy carbide ceramics produced by arc melting

Oscillatory pressure sintering of high entropy (Zr0.2Ta0.2Nb0.2Hf0.2Mo0.2)B2 ceramic

Dense and pure high-entropy metal diboride ceramics sintered from self-synthesized powders via boro/carbothermal reduction approach

Low temperature synthesis and densification of (Ti,V,Nb,Ta,Mo)(C,N) high-entropy carbonitride ceramics

Novel refractory high-entropy ceramics: Transition metal carbonitrides with superior ablation resistance

Preparation of (Ti0.2Zr0.2Hf0.2Nb0.2Ta0.2)C high‐entropy ceramic nanopowders via liquid‐phase precursor

Boron‐dependent Microstructural Evolution, Thermal Stability, and Crystallization of Mechanical Alloying Derived SiBCN

Study on microstructure, mechanical properties and thermal performance of single-phase (Ti,Zr,Hf)B 2 solid solution

Synthesis and Mechanical and Elevated Temperature Tribological Properties of a Novel High-Entropy (tivnbmow)c 4.375 with Carbon Stoichiometry Deviation

Novel Synthesis of (hf 0.25 Zr 0.25 Ti 0.25 Ta 0.25 )C-Sic Biphasic Ceramic Micro-Powders Using Single-Source-precursor Route

Nanocrystalline high‐entropy carbide ceramics with improved mechanical properties