Abstract:CsPbI3, also known as cesium lead iodide, has garnered significant attention as a potential absorber in perovskite solar cells (PSCs). CsPbI3-PSCs have not matched the high performance of hybrid PSCs. This study aimed to identify an effective combination of charge transport layers. Six-hole transporting layers (HTLs) including Spiro-OMeTAD, Cu2O, CuO, CuAlO2, CuSbS2, and SrCu2O2, as well as five electron transporting layers (ETLs) such as TiO2, WO3, ZnO, IGZO, and CdZnS, were tested separately in 30 PSCs. The findings of this research indicate that CuAlO2 as the HTL and WO3 as the ETL that are the most appropriate materials among the options examined, so we use FTO/WO3/CsPbI3/CuAlO2/Au as a required PSC. In this research, we used SCAPS (Solar Cell Capacitance Simulator)-1D device modeling to investigate the bilayer ETL of inorganic CsPbI3-PSC and discover the methods to improve their efficiency. In planar PSCs, optimizing electron–hole pair extraction and recombination at the ETL/perovskite interface is crucial for achieving high performance. The key concept is to enhance the WO3/perovskite interface properties by adding a 5 nm ultra-thin layer (UTL) of C60. The bilayer structure WO3/C60 was found to have the advantage of high electron extraction and low interfacial recombination, primarily due to more effective energy level alignment and defect passivation. To achieve the superior efficiency of PSC, various factors such as defect and doping densities in all layers, the energy level alteration of ETL and HTL, interface defect densities on both ETL and HTL sides, back metal contact, operating temperature, and parasitic resistances were optimized. After optimizing these parameters, the efficiency of the system containing WO3/C60 bilayer ETL was found to be 29.39%. The current work proposes a straightforward and promising method to create photovoltaic devices, especially for many types of perovskites, with desirable charge transport layers and recombination properties.

Low-cost kesterite (CZTS) bilayers as an effective hole-transport layer for perovskite solar cells

A Facile Interface Engineering Method to Improve the Performance of FTO/ZnO/CsPbI 3− X Br X ( X < 1)/C Solar Cells

Low-temperature Preparation Achieving 10.95%-Efficiency of Hole-Free and Carbon-Based All-Inorganic CsPbI3 Perovskite Solar Cells

Kesterite Cu 2 ZnSnS 4 as a Low-Cost Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells

Kesterite Cu2znsns4 As A Low-Cost Inorganic Hole-Transporting Material for High-Efficiency Perovskite Solar Cells

Low-cost and easily prepared interface layer towards efficient and negligible hysteresis perovskite solar cells

Reduced Graphene Oxide/CZTSxSe1‐x Composites As a Novel Hole‐Transport Functional Layer in Perovskite Solar Cells

High-Performance Rigid and Flexible Perovskite Solar Cells with Low-Temperature Solution-Processable Binary Metal Oxide Hole-Transporting Materials

Efficient Carbon-Based CsPbBr 3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

Efficient Carbon-Based CsPbBr3 Inorganic Perovskite Solar Cells by Using Cu-Phthalocyanine as Hole Transport Material

Targeting the imperfections at the ZnO/CsPbI2Br interface for low-temperature carbon-based perovskite solar cells

Improved performance of inorganic CsPbI 3 perovskite solar cells with WO 3 /C60 UTL bilayer as an ETL structure: a computational study

A Solution-Processed Dopant-Free Tin Phthalocyanine (snpc) Hole Transport Layer for Efficient and Stable Carbon-Based CsPbI2Br Planar Perovskite Solar Cells Prepared by a Low-Temperature Process

Enhancing the efficiency of the organic-inorganic hybrid perovskite cells using Al-doped ZnO as an Electron Transport Layer and CNTs as a Hole Transport Layer: An experimental and numerical study

Unraveling the Dual-Functional Mechanism of Light Absorption and Hole Transport of Cu2CdxZn1-xSnS4 for Achieving Efficient and Stable Perovskite Solar Cells.

Achieving 17.46% Efficiency CsPbI2Br Perovskite Solar Cells via Multifunction Lead Chloride‐Modified ZnO Electron Transporting Layer

CsPbI3 Based All‐Inorganic Perovskite Solar Cells: Further Performance Enhancement of the Electron Transport Layer‐Free Structure from Device Simulation

Unravelingthe Dual-Functional Mechanism of LightAbsorption and Hole Transport of Cu2CdxZn1–xSnS4 forAchieving Efficient and Stable Perovskite Solar Cells

Uniform Stepped Interfacial Energy Level Structure Boosts Efficiency and Stability of CsPbI2Br Solar Cells

Interfacial Molecular Doping And Energy Level Alignment Regulation For Perovskite Solar Cells With Efficiency Exceeding 23%

Low-temperature aqueous solution processed ZnO as an electron transporting layer for efficient perovskite solar cells