Abstract:The high-temperature creep strengthening mechanism and thermal stability of Laves phase are the key factors that affect its strengthening property in ferritic matrix. Therefore, in this study, two types of C14 Laves phase alloys, namely, Fe2Nb Laves phase Alloy S1 (Fe–9Cr–4Al–2Nb) (wt.%) and Fe2W Laves phase Alloy S2 (Fe–9Cr–4Al–2W) (wt.%) were prepared to investigate the strengthening mechanism and strengthening effect of Laves phase with different compositions in ferritic matrix. The creep properties and microstructure characteristics of the two alloys, in particular, the interfacial structure characteristics between Laves phases (Fe2Nb and Fe2W) and ferritic matrix were analyzed. The true stress exponent n for both Alloys S1 and S2 is 5, and the true activation energies Q of Alloys S1 and S2 are 372.47 and 365.82 kJ mol−1, respectively. The creep mechanisms of Alloys S1 and Alloy S2 are both dislocation climbing-dominated processes reinforced with precipitated phases. Alloy S1 exhibits higher high-temperature creep resistance than that of Alloy S2. The grain size of Alloy S1 is smaller than that of Alloy S2. Both the precipitates Fe2Nb in Alloy S1 and Fe2W in Alloy S2 are mostly located at the grain boundary. The density of dislocation in Alloy S1 is higher than that in Alloy S2, and the bending degree of dislocation lines caused by precipitate hindrance is also higher than that in Alloy S2. The orientation relationships between the Laves phase Fe2Nb and ferritic matrix in Alloy S1 are [011]α-Fe//[5 1 ̅9 ̅4 ̅]Fe2Nb, (011 ̅)α-Fe//(03 3 ̅ 1)Fe2Nb, with the atomic interface mismatch of 1.6%; the orientation relationships between the Laves phase Fe2W and ferritic matrix in Alloy S2 are [001]α-Fe//[01 1 ̅ 2]Fe2W, (1 1 ̅ 0)α-Fe//(01 1 ̅1 ̅) Fe2W, with the atomic interface mismatch of 1.9%. The results indicate that the Fe2Nb-type Laves phase may be more suitable to candidate for the strengthener in the ferritic matrix compared with Fe2W-type.

Insights into the gradient-characteristic precipitation behaviors of laves phase induced by Fe/W/Mo addition in Ti42Al5Mn alloy

Multistep evolution of βo phase during isothermal annealing of Ti-42Al-5Mn alloy: Formation of Laves phase

Study on Precipitation in (cocrfemnni)90al6ti4 High Entropy Alloy

Early Stages of Precipitation in Γ' Phase of a Ni–Al–Ti Model Alloy: Phase-Field and First-Principles Study

The role of the ω phase on the microstructure evolution of precipitation and mechanical property in Ti-3Al-5Mo-4Cr-2Zr-1Fe

Revealing the influence of Mo addition on interphase precipitation in Ti-bearing low carbon steels

Quantitative characterization of lamellar α precipitation behavior of IMI834 Ti-alloy in isothermal and non-isothermal heat treatments

Microstructure Evolution and Phase Transformations in Ti-22Al-25Nb Alloys Tailored by Super-Transus Solution Treatment

Effect of Cr content on precipitation behavior of (CoCrNi)94Ti3Al3 medium entropy alloys

Effects of cooling manner on Laves phase precipitation and mechanical properties of Al modified super ferritic stainless steels

Precipitation Behavior of Fe2Nb Laves Phase on Grain Boundaries in Austenitic Heat Resistant Steels

High-temperature strengthening mechanism and thermal stability of Laves phase in ferritic matrix

Effects of Fe on L12 phase precipitation and mechanical properties in Al0.3CrFeCoNi high-entropy alloy

Effect of Al addition on Nb-rich phase precipitation behavior in ferritic stainless steel

Influence of Partial Substitution of Mo for Cr on Structure and Hydrogen Storage Characteristics of Non-Stoichiometric Laves Phase TiCrB0.9 Alloy

Microstructural stability, phase evolution and mechanical properties of a forged W-modified high-Mn β-γ-TiAl alloy

Effect of V on the Precipitation Behavior of Ti−Mo Microalloyed High-Strength Steel

Effect of 2–6 At.% Mo Addition on Microstructural Evolution of Ti-44Al Alloy

Precipitation kinetics and morphology evolution of the Co3(Al, W) phase in a medium supersaturation Co–Al–W alloy

Phase Structure, Crystallography and Electrochemical Properties of Laves Phase Compounds Ti0.8Zr0.2V1.6Mn0.8âxMxNi0.6 (M=fe,al,cr,co)

Effect of Molybdenum Addition on the Precipitation of Carbides in the Austenite Matrix of Titanium Micro-Alloyed Steels