Avoiding microstructural instabilities in high tungsten containing superalloys by adjusting Al content
Xiang Fei,Naicheng Sheng,Shijie Sun,Shigang Fan,Jun Xie,Jinjiang Yu,Guichen Hou,Jinguo Li,Yizhou Zhou,Xiaofeng Sun
DOI: https://doi.org/10.1016/j.matchar.2024.113966
IF: 4.537
2024-05-10
Materials Characterization
Abstract:The effects of Al contents on the microstructures and mechanical properties of superalloy with high tungsten content were studied. During solidification, Al was found to be enriched in the residual liquid, which led to the transformation of eutectic morphology from reticular to bulk-like. When the Al content was increased to 8 wt%, β-NiAl phase formed in the inter-dendritic region, Thermo-Calc calculations confirms such transformation. The absolute value of the lattice misfit between the γ/γ' phases and the elastic strain energy increases, then the size of the γ' phase increases when the Al concentration rises from 7 wt% to 8 wt%. When the Al content was increased to 7 wt%, the tungsten-rich α-W phase is precipitated and the volume fraction is 1.20%. The volume fraction of the α-W phase increases to 7.84% when the Al content comes 8 wt%, which is consistent with the Thermo-Calc calculation results. After the room temperature tensile and stress rupture life test at 975 °C / 235 MPa, it revealed that the precipitation of hard and brittle α-W and β-NiAl phases with high Al content led to cracks sprouting at multiple locations and then interconnected, resulting in degraded performance. The high γ' phase density of 6 wt% Al makes it difficult to bypass the dislocation, and there is no brittle phase, the crack initiation site is decreased. The stress rupture life can reach 49.21 h of the alloy.
materials science, multidisciplinary,metallurgy & metallurgical engineering, characterization & testing