Abstract:Three-dimensional (3D) integration technology using Cu interconnections has emerged as a promising solution to improve the performance of silicon microelectronic devices. However, Cu diffuses into SiO2 and requires a barrier layer such as Ta to ensure acceptable reliability. In this paper, the effects of temperature and strain normal to the interface on the inter-diffusion of Cu and Ta at annealing conditions are investigated using a molecular dynamics (MD) technique with embedded atomic method (EAM) potentials. Under thermal annealing conditions without strain, it is found that a Cu-rich diffusion region approximately 2 nm thick is formed at 1000 K after 10 ns of annealing. Ta is capable of diffusing into the interior of Cu but Cu hardly diffuses into the inner lattice of Ta. At the Cu side near the interface an amorphous structure is formed due to the process of diffusion. The diffusion activation energy of Cu and Ta are found to be 0.9769 and 0.586 eV, respectively. However, when a strain is applied, a large number of crystal defects are generated in the sample. As the strain is increased, extrinsic stacking faults (ESFs) and lots of Shockley partial dislocations appear. The density of the dislocations and the diffusion channels increase, promoting the diffusion of Cu atoms into the inner lattice of Ta. The thickness of the diffusion layer increases to 4 times the value when only a temperature load of 700 K is applied. The MD simulations demonstrated that Ta is very effective as a barrier layer under thermal loading only, and its effectiveness is impaired by tensile strain at the Cu/Ta interface. The simulations also clarified the mechanism that caused the impairment. The methodology and approach described in this paper can be followed further to study the effectiveness of barrier layers under various annealing and strain conditions, and to determine the minimum thickness of barrier layers required for a particular application.

Investigation of atomic diffusion behavior of Mo/Au interface

Interdiffusion Flux and Interface Movement in Metallic Multilayers

Atomic-scale investigation on diffusion mechanism of immiscible Mo/Cu system under different temperatures and electric field

Unidirectional Thermal Diffusion in Bimetallic Cu@Au Nanoparticles.

The diffusion behaviors at the Cu-Al solid-liquid interface: A molecular dynamics study

Molecular dynamics simulation of diffusion bonding of Al–Cu interface

Investigation of alloying process of Cu and Au nanoparticles based on molecular dynamics simulation

Aes Analysis Of Interdiffusions In Cr/Au, Ti/Au And Tiw/Au Multi-Layer Films

Interdiffusion cross-high-entropy alloys, nano-multilayer foils, and Al interface: An atomistic simulation

Diffusing behavior of MoO3 on Al2O3 and SiO2 thin films

Formation and structural anomaly of the metastable phases in an immiscible Ag - Mo system studied by ion beam mixing and molecular dynamics simulation

Study of the Electromigration Behaviour of Au–Ag Thin Films Deposited on SiO 2 Substrate Using AES, XPS and AFM Techniques

Investigation on the Diffusion Behaviors and Mechanical Properties of the Ti/Al Interface Using Molecular Dynamics Simulation

A Molecular Dynamics Study of the Structural Change Differences Between Au 225 and Au 369 Clusters on MgO Surfaces at Low Temperature

Diffusion behavior of Cu/Ta heterogeneous interface under high temperature and high strain: An atomistic investigation

Atomic diffusion behavior and diffusion mechanism in Fe–Cu bimetal casting process studied by molecular dynamics simulation and experiment

Molecular dynamics study of solid state interfacial reaction in the Ni-Mo system

Study of MoO3 Surface Diffusion on the Al2O3 Film

Impact of thermal annealing on the interaction between monolayer MoS2 and Au

Effect of the Diffusion Annealing on Concentration Distributions in interfacial Regions of Au/Ag-Cu/Cu-Ni-Zn Laminate Strips

Tracing magnetic atom diffusion with annealing at the interface between CoMn alloy and MnGa layer by X-ray magnetic circular dichroism