Abstract:The methanation process, or Sabatier process, allows carbon dioxide and carbon monoxide to be hydrogenated into methane, which can be subsequently injected (once the gas grid specifications have been respected) into the gas network infrastructures already present in Europe. This process can be effectively adopted to convert captured CO 2 streams from power plants or hard to abate plants by using green hydrogen from renewable-driven water electrolysis. The technical aspects of concern in the methanation process are certainly the strong exothermicity of the process, with consequent possible generation of hotspots along the entire catalyst bed and the management of reaction heat through thermal recovery. These peculiar aspects influence the choice of construction materials and geometry of the methanation reactor, operating parameters, cooling system, type of catalyst/support and the initial conditions of the feed. In particular, the generation of hotspots influences the local kinetic reaction in the methanation reactor, the diffusional limits of hydrogen and carbon dioxide inside the catalyst and the chemical-physical characteristics of the catalyst bed. The present work reports a first scale-up of the Sabatier process, developed in Aspen Plus simulation environment, with the following characteristics: reactor size to process 925 Nm 3 /h, (750 hydrogen and 175 carbon dioxide), at 15 bar and 250 °C. After the implementation in the steady state, a dynamic simulation is performed to carry out a transient study of the entire plant. In particular, the attention is focused on the variation in the hydrogen load, produced by electrolysis from the energy surplus from renewable sources. Considering the variable nature of the power flow supplied to the electrolyser and therefore any shutdown and cold start-up phases of this equipment, the following load variation scenarios for the Power to Gas (PtG) system are simulated: −5%, +5% and −30 % molar flow rate of incoming hydrogen, compared to steady conditions used in the preliminary design of the equipment. The study highlights how the cooled reactor configuration is more performing and characterized by a lower number of reactors in series (2 reactors) when compared to the adiabatic configuration (5 reactors). Furthermore, in the cooled reactor configuration the control system is able to respond more quickly to load variations compared to that designed for the adiabatic case, although the latter is mostly adopted from the industrial viewpoint due to temperature control issues. Moreover, the control system manages to respond to load variations by bringing the values of interest (gas grid residual concentration of hydrogen and carbon dioxide, Wobbe index) into the target intervals.

Core‐Shell Catalyst Pellets for CO2 Methanation in a Pilot‐Scale Fixed‐Bed Reactor

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Engineering MOx/Ni Inverse Catalysts for Low-Temperature CO2 Activation with High Methane Yields

High-capacity CO/CO2 methanation reactor design strategy based on 1D PFR modelling and experimental investigation

Highly productive and robust core@shell HeatPath SiC-Al2O3 @Co/Re/Al2O3 catalyst for Fischer–Tropsch synthesis

Efficient and Stable Ni/ZSM-5@MCM-41 Catalyst for CO 2 Methanation

Recent Application of Core-Shell Nanostructured Catalysts for CO2 Thermocatalytic Conversion Processes

Methanation of Coke Oven Gas over Ni-Ce/γ-Al2O3 Catalyst Using a Tubular Heat Exchange Reactor: Pilot-scale Test and Process Optimization

Reaction Characteristics of Ni-Based Catalyst Supported by Al2O3 in a Fluidized Bed for CO2 Methanation

Simulation Study of Ceramic Fibrous Structured Catalysts for CO2 Methanation—Enhancement of the Performance and Comparison to Pellet Catalysts

Core–shell silica@Cu x ZnAl LDH catalysts for efficient CO 2 hydrogenation to methanol

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation

Experimental demonstration of 80 kWth chemical looping combustion of biogenic feedstock coupled with direct CO2 utilization by exhaust gas methanation

Direct Conversion of Carbon Dioxide to Methane over Ceria- and Alumina-Supported Nickel Catalysts for Biogas Valorization.

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

Bimetallic Ni-Fe Supported by Gadolinium Doped Ceria (GDC) Catalyst for CO2 Methanation

A Study on Activity of Coexistent CO Gas during the CO2 Methanation Reaction in Ni-Based Catalyst

Facile use of coal combustion fly ash (CCFA) as Ni-Re bimetallic catalyst support for high-performance CO2 methanation

Preliminary Evaluation of Methods for Continuous Carbon Removal from a Molten Catalyst Bubbling Methane Pyrolysis Reactor

Power-to-Gas: Process analysis and control strategies for dynamic catalytic methanation system

Effect of coal char loaded with catalyst on methanation reaction