Abstract:Preparation of (A) Polyolefin elastomer/ethylene vinyl acetate (POE/EVA) films and (B) POE/EVA/ultra‐high molecular weight polyethylene (UHMWPE) composites with twin screw extrusion and hot‐press process. Polyolefin elastomer (POE) films can be used as a matrix for ultra‐high molecular weight polyethylene (UHMWPE) fiber‐reinforced composites via a hot‐melt process. However, the low melting temperature of UHMWPE limits composite processing. Therefore, this study aimed to create a film by blending POE with ethylene vinyl acetate (EVA) to reduce the film's processing temperature. Morphological analysis revealed that due to limited compatibility, EVA appeared as droplets within the immiscible POE matrix. T‐Peel tests demonstrated increased self‐adhesion in both the POE/EVA films and the fiber‐reinforced composites with higher EVA content. However, the mechanical properties of POE/EVA films, including tensile properties and shore hardness, were reduced due to EVA having lower inherent properties. UHMWPE fiber‐reinforced composites were fabricated from these films. In composites, optimal tensile and flexural properties were observed at lower EVA content. Scanning electron microscopy analysis suggests that the POE/EVA films are sufficiently infiltrated at 10–20 wt% EVA content. As EVA content increased, the drop weight impact test indicated a reduction in the maximum impact load and an increase in impact energy, attributed to improved adhesion and a broader distribution of impact load across the interface. Highlights Polyolefin elastomer/ultra‐high molecular weight polyethylene composites' properties were studied with varying ethylene vinyl acetate (EVA) additive content. Add EVA to improve film impregnation when forming composites Increase in impregnation affects increase in properties of composites. Characterization shows that the optimal EVA content is 10–20 wt%.

Characteristics and Challenges of Poly(ethylene- co -vinyl acetate) Solution Electrospinning

Characteristics and challenges of Poly(ethylene-co-vinyl acetate) solution electrospinning

Effect of hyperbranched poly(ester amine) additive on electrospinning of low concentration poly(methyl methacrylate) solutions

Periodic Ethylene-Vinyl Alcohol Copolymers Via ADMET Polymerization: Synthesis, Characterization, and Thermal Property

IMPROVEMENT OF POLY(METHYL METHACRYLATE) ELECTROSPUN FIBER UNIFORMITY BY ADDITION OF POLY(ESTER AMINE)

Study on electrospinnability of PVP/PEO composite micro-nano fibers

The influence of acetic acid and ethanol on the fabrication and properties of poly(vinyl alcohol) nanofibers produced by electrospinning

Electrospinning and Rheological Characterization of Polyethylene Terephthalate and Polyvinyl Alcohol with Different Degrees of Hydrolysis Incorporating Molecularly Imprinted Polymers

Electric Field Simulation and Effect of Different Solvent Ratios on the Performance of Single Electrospun PVDF/PEI Composite Film

Interaction Between Poly(vinyl Alcohol) and Layered Double Hydroxide (LDH) Particles with Different Topological Shape and Their Application in Electrospinning

Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone

Electrospinning of Soy Protein Isolate/Poly (vinyl alcohol)

Molecular Interaction, Chain Conformation, and Rheological Modification during Electrospinning of Hyaluronic Acid Aqueous Solution

Effect of Heat Treatment Mode and Aggressive Media on Mechanical Properties of Porous Polytetrafluoroethylene Membranes Fabricated via Electrospinning

Preparation and Properties of Poly (vinyl Alcohol) Nanofibers by Electrospinning

Influence of Electrospinning Parameters on the Morphologies of Polyvinyl Acetate Fibers

Synthesis of Mxene-PVDF Composite Nanofiber Cloth

Thermo-rheological and interfacial properties of polylactic acid/polyethylene glycol blends toward the melt electrospinning ability

Electrospinning of ultrafine PVDF/PC fibers from their dispersed solutions

Improved processability for ultra‐high molecular weight polyethylene/polyolefin elastomer composites: Effect of ethylenevinyl acetate copolymer

Effects of Solvent on Structures and Properties of Electrospun Poly(ethylene Oxide) Nanofibers