Abstract:Collagen and polyvinylalcohol (PVA) are extremely important in the applications of biomaterials including with electrospinning and wet-spinning methods. However, the rheological behavior of collagen and PVA blended solutions before spinning is still scarce. In this work, collagen was firstly extracted from pigskin building on the maximum maintenance of the natural structure and blended with PVA. The following detailed investigation on the viscosity and the rheology of blended solutions were carried out by rotate rheometer. The obtained results suggested that collagen/PVA solutions performed as Non-Newtonian fluids. Significantly, all the samples showed the shear thinning pseudoplastic behaviors with the steady shear rate. With increasing the collagen content or decreasing the operating temperature, the viscosity of blended solutions both increased at the same shear rate of 16.8 s −1 , accompanied by the fall of the Non-Newtonian index ( n ) for the collagen/PVA samples. Furthermore, both low temperature and high concentration increased the structure of the spinning solution, which indicated that the temperature should be controlled in a higher range to improve the spinnability of the solution, but without collagen decomposition in the whole process. The increase of PVA content could reduce the degree of system structure, that was to say that the addition of PVA improved the spinnability of the system. As an application, the solution of collagen/PVA was wet spinned with the ethanol absolute as coagulant and collagen/PVA composite fibers were successfully prepared, which have compensated for the disadvantage of mono-component collagen materials. Of course, this experimental results is not limited to the above application, which really extends the potential use of collagen/PVA blended solutions towards the design of the collagenbased biomaterials.

The influence of acetic acid and ethanol on the fabrication and properties of poly(vinyl alcohol) nanofibers produced by electrospinning

Study on Fabrication and Properties of Polyvinyl Alcohol/Chitosan Nanofibers Created from Aqueous Solution with Acetic Acid and Ethanol by the Electrospinning Method

A systematic investigation of solution and technological parameters for the fabrication and characterization of poly (vinyl alcohol–chitosan electrospun nanofibers

Study on the Electrospinnability of Polyvinyl Alcohol Solutions by Using Water/N, N-dimethylacetamide or Water/N, N-dimethylformamide As Solvents

Preparation and Properties of Poly (vinyl Alcohol) Nanofibers by Electrospinning

The Effect Acetic Acid Has on Poly(N-Vinylcaprolactam) LCST for Biomedical Applications

Effect of the composition and electrospinning time of gelatin solutions in acetic acid on their rheological properties and nanofiber morphology

Interaction Between Poly(vinyl Alcohol) and Layered Double Hydroxide (LDH) Particles with Different Topological Shape and Their Application in Electrospinning

Electrochemical characterization of PVA/SA nanofibers obtained by electrospinning processing

“Dialdehyde Cellulose” Nanofibers by Electrospinning as Polyvinyl Alcohol Blends: Manufacture and Product Characterization

Synthesis of Nanofiber Polyvinyl Alcohol (PVA) with Electrospinning Method

Studying of Nanoribbon and Circular Poly (Vinyl Alcohol) Nanofibers Deposited by Electrospinning: Film Synthesis, Characterization Structure, and Resistance Corrosion

Effect of hyperbranched poly(ester amine) additive on electrospinning of low concentration poly(methyl methacrylate) solutions

The morphology and thermo-regulating properties of electrospun PVA/PEG/Ag nanofibers of water and formic acid solvents

Influence of Electrospinning Parameters on the Morphologies of Polyvinyl Acetate Fibers

Electrospinning and Rheological Characterization of Polyethylene Terephthalate and Polyvinyl Alcohol with Different Degrees of Hydrolysis Incorporating Molecularly Imprinted Polymers

A Comprehensive Study on the Rheological Properties of Collagen/PVA Spinning Solutions from Acetic Acid Solvent

Study on the Preparation and Lipophilic Properties of Polyvinyl Alcohol (PVA) Nanofiber Membranes via Green Electrospinning

PVA-Based Electrospun Materials—A Promising Route to Designing Nanofiber Mats with Desired Morphological Shape—A Review

Poly(vinyl Alcohol)–perfluorinated Sulfonic Acid Nanofiber Mats Prepared Via Electrospinning As Catalyst

Electrospun Polyvinyl Alcohol/Halloysite Nanotubes Composite Nanofibers