Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone

Fatima Tuz Zahra,Ying Zhang,Adeolu Oluwaseun Ajayi,Quincy Quick,Richard Mu

DOI: https://doi.org/10.3390/polym16091217

IF: 5

2024-04-27

Polymers

Abstract:Polyvinylpyrrolidone (PVP) is a synthetic polymer that holds significance in various fields such as biomedical, medical, and electronics, due to its biocompatibility and exceptional dielectric properties. Electrospinning is the most commonly used tool to fabricate fibers because of its convenience and the wide choice of parameter optimization. Various parameters, including solution molarity, flow rate, voltage, needle gauge, and needle-to-collector distance, can be optimized to obtain the desired morphology of the fibers. Although PVP is commercially available in various molecular weights, PVP with a molecular weight of 130,000 g/mol is generally considered to be the easiest PVP to fabricate fibers with minimal challenges. However, the fiber diameter in this case is usually in the micron regime, which limits the utilization of PVP fibers in fields that require fiber diameters in the nano regime. Generally, PVP with a lower molecular weight, such as 10,000 g/mol and 55,000 g/mol, is known to present challenges in fiber preparation. In the current study, parameter optimization for PVP possessing molecular weights of 10,000 g/mol and 55,000 g/mol was carried out to obtain nanofibers. The electrospinning technique was utilized for fiber fabrication by optimizing the above-mentioned parameters. SEM analysis was performed to analyze the fiber morphology, and quantitative analysis was performed to correlate the effect of parameters on the fiber morphology. This research study will lead to various applications, such as drug encapsulation for sustained drug release and nanoparticles/nanotubes encapsulation for microwave absorption applications.

polymer science

What problem does this paper attempt to address?

The problem that this paper attempts to solve is about how to prepare low - molecular - weight polyvinylpyrrolidone (PVP) nanofibers by optimizing electrospinning parameters. Specifically, the research focuses on PVP with molecular weights of 10,000 g/mol and 55,000 g/mol, because these low - molecular - weight PVPs face greater challenges during the electrospinning process, such as larger fiber diameters and the easy formation of beaded structures. These problems limit the use of low - molecular - weight PVP fibers in applications requiring nanoscale fibers, such as drug - release systems and microwave - absorption applications.

To overcome these challenges, the paper explores the following points in detail:
1. **Solution concentration**: By adjusting the concentration of the PVP solution (10 wt%, 30 wt%, 50 wt%, 70 wt%, 80 wt%), the influence of different concentrations on the fiber morphology was studied.
2. **Voltage**: The influence of different voltages (15 kV, 20 kV, 25 kV) on the fiber morphology was studied.
3. **Flow rate**: The influence of different flow rates (0.5 mL/h, 1.0 mL/h) on the fiber morphology was investigated.
4. **Needle specification**: The influence of different needle specifications (25G, 22G) on the fiber morphology was compared.
5. **Needle - to - collector distance (NCD)**: The influence of different distances (12 cm, 14 cm, 16 cm) on the fiber morphology was studied.

Through the optimization of these parameters, the research aims to find the best electrospinning conditions to prepare uniform, beaded - structure - free low - molecular - weight PVP nanofibers. This not only helps to improve the mechanical properties and functionality of the fibers, but also makes it possible for low - molecular - weight PVP to be used in various high - requirement applications.