Abstract:The process of melt electrospinning has received noteworthy attention due to its ability to fabricate micro scaled polymer fibers. Recently, a melt electrospinning process has been attracting attention for biomedical applications, in particular with scaffold fabrication for tissue engineering. In order to enhance cell attachment and proliferation on scaffolds, it is important to control fiber diameters to create an environment to which cells can attach, grow, and proliferate with ease. However, because electrospinning is a process with many parameters, it is particularly difficult to precisely control the diameter of the resulting fibers. Also, polymer powders or pellets melted in nozzles are typically used for melt electrospinning. However, a filament feeding melt electrospinning process has not been yet been implemented. In this study, we developed a melt electrospinning device which can feed PCL (Polycaprolactone, Mw: 80 000 g mol−1) filaments for advanced electrospun fiber diameter control. The PCL filaments were first fabricated by a small scale micro-compounder and then fed into the melting chamber of the electrospinning device. The system was then heated to a desired temperature, and the melt was extruded through a nozzle. The potential difference between the nozzle and counter electrode then drew down the PCL extrudate, creating fine microfibers. Temperature was controlled and monitored via a customized temperature control system. In order to control the dispensing of the PCL filaments, a customized control algorithm using NI (National Instruments) LabVIEW was used. In order to actively cool PCL filaments, a miniature computer fan was attached on the side of the melting chamber so that the filaments would not buckle. This paper reveals the investigation of significant process parameters that influence fiber diameters and their optimization. For instance, applied voltages, distances between the nozzle and a counter electrode, processing temperatures, and polymer resin flowrates were varied. We also studied and summarized the effect of duty cycle—a ratio of forward and backward motions of the filament within a cycle time—for advanced fiber diameter control. Moreover, the relationship between a flow rate and a duty cycle and their influences on a fiber diameter were studied.

Scalability analysis and demonstration of distributed multicarrier reusable network with optical add/drop multiplexers

Central Composite Design and Response Surface Methodology for Optimizing the Diameter of Electrospun Polyamide-6,6 Nanofiber Mat

Evaluation of the effective parameters on the electrospinning of polyvinyl alcohol–chitosan nanofibers using response surface methodology (RSM)

A Machine Learning Approach to Model the Electrospinning Process of Biocompatible Materials

Melt electrospinning process optimization of polylactic acid nanofibers

Comparative Study of Electrospinning Parameters for Production of Polylactic Acid and Polycaprolactone Nanofibers Based on Design of Experiment

Optimization of the Electrospun Niobium–Tungsten Oxide Nanofibers Diameter Using Response Surface Methodology

Electrospinning Processing of Polymer/Nanocarbon Nanocomposite Nanofibers—Design, Features, and Technical Compliances

INVESTIGATION OF THE IMPACT OF DIFFERENT PARAMETERS ON THE MORPHOLOGY OF ELECTROSPUN POLYURETHANE NANOFIBERS

Optimization of Electrospinning Parameters for Lower Molecular Weight Polymers: A Case Study on Polyvinylpyrrolidone

Electrospinning process optimization for Nylon 6,6/Epoxy hybrid nanofibers by using Taguchi method

Influences of Process Parameters of Near-Field Direct-Writing Melt Electrospinning on Performances of Polycaprolactone/Nano-Hydroxyapatite Scaffolds

Electrospinning preparation and surface hydrophilicity investigation of poly(lactic acid), poly(3-hydroxybutyrate-o-4-hydroxybutyrate), and poly(propylene carbonate) nanometer fiber membranes

Biomimetic electrospun nanofibrous scaffold for tissue engineering: preparation, optimization by design of experiments (DOE), in-vitro and in-vivo characterization

Coaxial electrospinning of polycaprolactone – A design of experiments approach

Fabricating and controlling PCL electrospun microfibers using filament feeding melt electrospinning technique

Electrospun polymeric nanofibers for dental applications

Electrospinning of Ultra-Thin Nanofibers Achieved Through Comprehensive Statistical Study

Effect of Solution Composition Variables on Electrospun Alginate Nanofibers: Response Surface Analysis

Modeling and optimization of electrospinning conditions of PVB nanofiber by RSM and PSO-LSSVM models for improved interlaminar fracture toughness of laminated composites

The Effect of Electro blow Spinning Parameters on The Characteristics of Polylactic Acid Nanofibers: Towards Green Development of High-Performance Biodegradable Membrane