Abstract:Refractory materials used for the lining of metallurgical vessels are in direct contact with moving molten steel during the entire refining process. The dynamic interaction between molten steel and refractory material will seriously affect the service life of the refractory lining and restrict the smelting safety and efficiency of steelmaking. In this paper, experiments on the interaction between an alumina-magnesia castable and molten steel under dynamic smelting conditions were performed. The corrosion behaviour of molten steel on the alumina-magnesia refractory, which is the prevailing lining material for the refining ladle, was analysed and discussed. The corrosion mechanism of the alumina-magnesia refractory indicated that the refractory castable reacts with the molten steel and forms a metamorphic layer at the interface that has a liquid phase at high temperatures. The liquid oxide layer is emulsified with the molten steel under dynamic conditions such that the castable is eroded into the molten steel first, and steel droplets are continuously diffused into the castable and grow, which expands the scope of the reaction layer and gradually degrades the refractory castable. Consequently, the castable is peeled into the molten steel, and the molten steel is polluted. The reaction products of refractory castable and molten steel with different chemical compositions vary, and the viscosity of the reaction layer at high temperatures is the key factor. The modified capillary number (Ca*) can be used to compare the refractory wear by estimating the critical velocity of the emulsification. Furthermore, the empirical formulas for the emulsion droplet size were established, providing guidance for the application of refractory materials in the smelting of high-quality steel.

Degradation behaviors of cement-free corundum-spinel castables in Ruhrstahl Heraeus refining ladle: Role of infiltrated steel

Corrosion mechanism of cement-bonded Al2O3–MgAl2O4 pre-cast castables in contact with molten steel and slag

Formation of ferrospinel layer at the corroded interface between Al 2 O 3 ‐spinel refractory and molten steel in RH refining ladle

Chemical attack of Al2O3-MgAl2O4 refractory castables in the non-slag-tapping side of refining ladle

Corrosion behavior and failure mechanism of amorphous Al2O3 coating at high-temperature LBE

Thickness Monitoring and Discontinuous Degradation Mechanism of Wear Lining Refractories for Refining Ladle

Dynamic interaction of refractory and molten steel: Corrosion mechanism of alumina-magnesia castables

Corrosion mechanism of reactive MgO‐bonded Cr2O3‐bearing castables in CaO–Al2O3–Fe2O3–SiO2‐based steel‐making slag

Slag Corrosion Behavior of Novel Lightweight Magnesia Castable in a High-Basicity Slag: Role of Micropores and Nanosized Zirconia

Corrosion of high-chrome refractory materials by high-sodium slag in an entrained-flow gasifier

Enhanced corrosion resistance by simultaneous refinement of pore structures and phase composition: A novel lightweight microporous alumina-rich spinel (Mg0.4Al2.4O4)

Corrosion in high alumina refractory serviced in a bench-scale entrained flow gasifier

Thermomechanical finite element modeling of steel ladle containing alumina spinel refractory lining

Corrosion of MgO-C with Magnesium Aluminate Spinel Addition in A Steel Casting Simulator

Microstructure evolution, mechanical characteristics and erosion behavior of Cr2O3–Al2O3–MgO–ZrO2 refractories in molten reduction slag

Corrosion mechanism of Al2O3–SiC–C refractory by SiO2–MgO-based slag

Enhancement, application, and challenges of chromium–corundum high‐temperature refractories

Interactions of high-chromia refractory materials with infiltrating coal slag in the oxidizing atmosphere of a cyclone furnace

The critical role of aggregate microstructure in thermal shock resistance and slag resistance of Al2O3–SiC–C castable

Corrosion of MgO–C Refractory with Ladle Slags

Degradation mechanism of high alumina refractory bricks by reaction with deposits in a rotary kiln for fluxed iron ore pellets production