Abstract:The bend pipe with a circular section, which is widely used in hydropower, chemical industry and other fields, is a common form in pipeline systems. However, secondary flow occurs when the fluid flows through the bend pipe, thereby affecting the stability of the pipeline system. Different bending angles have various effects. Therefore, this paper establishes 3D models of a circular bend pipe with different bending angles. The influence of bending angle on flow field distribution and downstream flow is analyzed numerically. The larger the bending angle is, the more obvious the flow distribution and even the unevenness at the elbow will be, hence resulting in poor stability. The distance required to restore flow uniformity also increases. The pressure energy loss of the bend pipe with different bending angles is investigated. Results show that with the increase in bending angle, the global pressure loss presents a trend of "increase-decrease-increase." The closer the bending angle is to 90°, the greater the influence of centrifugal force is on the flow, and the more obvious the secondary flow phenomenon will be. Aiming at the nonuniformity phenomenon, the structure optimization of a 90° bend pipe with the greatest influence is conducted. The improvement of the flow characteristics of bend pipe with different thick-diameter ratio and length-diameter ratio is compared. The deflector with a certain thickness can enhance the uniformity, safety and useful life of the bend pipe. The sharp-end length can improve the velocity uniformity to a certain extent but has minimal influence on flow characteristics compared with the thick-diameter ratio. This paper aims to study and improve the flow performance of a multi-structure bend pipe to make it suitable for more complex conditions.

Effect of microstructure and bending angle in cold bend pipe of SA 106B on flow accelerated corrosion behavior in simulated pressurized water reactor secondary circuit water environment

Microstructural Understanding of Flow Accelerated Corrosion of SA106B Carbon Steel in High-Temperature Water with Different Flow Velocities

Effects of fluid dynamics Parameters on flow-accelerated corrosion at elbow of carbon steel pipeline

Effect of Fusion Boundary Microstructure on Flow-Accelerated Corrosion Cracking

CFD-DEM Analysis of Hydraulic Conveying Bends: Interaction Between Pipe Orientation and Flow Regime

Effect of Tempered Martensite and Ferrite/Bainite on Corrosion Behavior of Low Alloy Steel Used for Flexible Pipe Exposed to High-Temperature Brine Environment

Numerically Investigating the Influence of Local Flow Behaviors on Flow-Accelerated Corrosion Using Two-Fluid Equations

The Effect of Flowing Velocity and Impact Angle on the Fluid-Accelerated Corrosion of X65 Pipeline Steel in a Wet Gas Environment Containing CO2

Predictions of Hydrodynamic Characteristics and Corrosion Rates Using CFD in the Piping Systems of Pressurized-Water Reactor Power Plant

Impact of Hot Bending on the High-Temperature Performance and Hydrogen Damage of 2.25Cr-1Mo-0.25v Steel

Cfd Investigating The Changes Of Fac Wear Sites Due To The Power Uprate Of Nuclear Power Plant

A Two-Phase Methodology to Predict Fac Wear Sites in the Piping System of A Bwr

Study of Bauschinger effect of acicular ferrite and polygonal ferrite through ex-situ interrupted bending tests in API X80 linepipe steels

Numerical Investigation and Optimization of the Flow Characteristics of Bend Pipe with Different Bending Angles

Environmentally assisted cracking in the fusion boundary region of a SA508-Alloy 52M dissimilar weld joint in simulated primary pressurized water reactor environments

Combined compression-bending performance and design of CFST with localised pitting corrosion

Thermal Aging Effect Of Cdss On The Integrity Of The Pwr Primary Pipe With Damage Tolerance Method

A novel method to determine the flow accelerated corrosion rate in the elbow

Numerical Simulation to Study the Effect of Arc Travelling Speed and Welding Sequences on Residual Stresses in Welded Sections of New Ferritic P92 Pipes

Characterization of Flow-Accelerated-corrosion of Pressure Piping Welded Joints

Decoupling the role of microstructure and geometric discontinuity introduced by weld reinforcement height on corrosion behavior of SA106B/316L SS welded joint in the flowing 0.5 M NaCl solution