Abstract:Gate valves, which are widely applied in pneumatic conveying systems, are vulnerable to erosion by particles. It is thus important to investigate the erosion in gate valves from the perspective of fluid analysis, and then to predict and improve their lifetimes. The effects of valve geometry and gas-solid flow conditions on valve erosion are investigated. Since a gate valve usually operates fully open to let fluid pass through, the geometry is simplified as a cavity. As gate valves are always placed horizontally in industrial situations, investigated cavities are placed horizontally, and the erosion damage to the bottom half of the aft wall (surface T), which is most likely to be eroded, is studied. A computational fluid dynamics (CFD) based two-way Eulerian-Lagrangian procedue is used to predict the erosion severity. The simulation procedure is validated by comparing the CFD results with those obtained from experiments of a pipe and an elbow, and also with the erosion region of a damaged valve. For convenience, the total erosion ratio, defined as the ratio of the mass eroded on a particular surface to the total particle mass passing through the pipe inlet during the same time, is introduced. The results show that the total erosion ratio of surface T is largely independent of the mass flux ratio, pipe diameter and cavity depth. Meanwhile, the total erosion ratio increases with cavity width and particle diameter, while it decreases with inlet velocity. According to the fitted results, a simple erosion formula is proposed and validated by the CFD results in another 16 orthogonal experiments. Furthermore, the formula is improved for various values of Brinell hardness of carbon steel and sharpness factors of particles.

Effects of fluid dynamics Parameters on flow-accelerated corrosion at elbow of carbon steel pipeline

Experimental and Numerical Analysis of the Impact of Corrosion on Pipeline Failure Pressure

A novel method to determine the flow accelerated corrosion rate in the elbow

Numerically Investigating the Influence of Local Flow Behaviors on Flow-Accelerated Corrosion Using Two-Fluid Equations

Predictions of Hydrodynamic Characteristics and Corrosion Rates Using CFD in the Piping Systems of Pressurized-Water Reactor Power Plant

The Effect of Flowing Velocity and Impact Angle on the Fluid-Accelerated Corrosion of X65 Pipeline Steel in a Wet Gas Environment Containing CO2

Cfd Investigating The Changes Of Fac Wear Sites Due To The Power Uprate Of Nuclear Power Plant

Microstructural Understanding of Flow Accelerated Corrosion of SA106B Carbon Steel in High-Temperature Water with Different Flow Velocities

A Novel Method to Determine Flow‐accelerated Corrosion Rate Based on Fluid Structure Interaction

Effect of microstructure and bending angle in cold bend pipe of SA 106B on flow accelerated corrosion behavior in simulated pressurized water reactor secondary circuit water environment

A Two-Phase Methodology to Predict Fac Wear Sites in the Piping System of A Bwr

Flow-Assisted Corrosion of API 5L X56 Steel: Effect of Flow Velocity and Dissolved Oxygen

Effect of Fusion Boundary Microstructure on Flow-Accelerated Corrosion Cracking

A Statistical Model for Accessing Wall Thinning Rate Due to Flow Accelerated Corrosion Based on Inspection Data in Nuclear Power Plants

Coupling Analysis Of Fluid-Structure Interaction In Fluid-Filled Elbow Pipe

Numerical study on characteristics of flow accelerated corrosion in a globe valve under different working conditions

Assessment by finite element modelling of the mechano-electrochemical interaction at corrosion defect on elbows of oil/gas pipelines

Three-dimensional numerical investigation of solid particle erosion in gate valves

Surface Stress Analysis of Internally Corroded Pipes under External Pressure

CFD-Based Erosion and Corrosion Modeling of a Pipeline with CO2-Containing Gas–Water Two-Phase Flow

Investigation on Multiphase Erosion–Corrosion of Elbow in LPG Desulfurization Unit