Abstract:Large‐area, high‐quality CsPbIBr2 thick films with (100)‐preferred orientation and low trap density are prepared using a spray‐coating method with air as a gas carrier via a dual‐additive‐assisted solution strategy. The unencapsulated X‐ray detector prepared based on CsPbIBr2 thick film exhibits high sensitivity (1420 μC Gyair−1 cm−2) and long‐term stability (80% of the original sensitivity after 1000 h). The realization of large‐area high‐quality perovskite thick films under an atmospheric environment without humidity control is confronting an urgent challenge for the applications in X‐ray detection and imaging. A spray‐coating method with air as the gas carrier is employed to achieve large‐area perovskite thick films for X‐ray flat‐panel detection applications. To further improve the quality of the thick films, the 10 μm‐thick CsPbIBr2 films with (100)‐preferred orientation, low trap density (7.1 × 1012 cm−3) and high resistivity corresponding to low dark current (3.2 × 10−9 A) are prepared via dual‐additive‐assisted (NH4SCN and L‐α‐phosphatidylcholine (LP)) solution strategy under atmospheric environment with relative humidity of 60% (60% RH). Thus, the metal‐semiconductor‐metal‐structured (Au/CsPbIBr2/Au) transverse X‐ray detection device under 40 KeV X‐ray irradiation possesses a high sensitivity up to 1420 μC Gyair−1 cm−2 under a weak electric field of 18 V mm−1 and a low dose rate of 3.3 μGyair s−1 that is lower than a dose rate of ≈5.5 μGyair s−1 required for routine medical diagnosis. Strikingly, the unencapsulated device maintains 80% (1120 μC Gyair−1 cm−2) of the original sensitivity after 1000 h under the atmospheric environment with 45–55% RH. These results pave the way for the practical applications of perovskite thick films in X‐ray medical detection and imaging.

Low‐Cost and Large‐Area Hybrid X‐Ray Detectors Combining Direct Perovskite Semiconductor and Indirect Scintillator

Energy Transfer Assisted Fast X‐ray Detection in Direct/Indirect Hybrid Perovskite Wafer

X-ray Sensitive Hybrid Organic Photodetectors with Embedded CsPbBr3 Perovskite Quantum Dots

Liquid-Phase Epitaxial Growth of Large-Area MAPbBr 3– n Cl n /CsPbBr 3 Perovskite Single-Crystal Heterojunction for Enhancing Sensitivity and Stability of X-ray Detector

2D Perovskite Mn2+‐Doped Cs2CdBr2Cl2 Scintillator for Low‐Dose High‐Resolution X‐Ray Imaging

An aerosol-liquid-solid process for the general synthesis of halide perovskite thick films for direct-conversion X-ray detectors

Pixelated liquid perovskite array for high-sensitivity and high-resolution X-ray imaging scintillation screens

Polycrystalline hybrid perovskite with enhanced ordered crystal domains for sensitive X-ray detection

Heterointerface Design of Perovskite Single Crystals for High‐Performance X‐ray Imaging

Solution-processed perovskite for direct X-ray detection

Wafer-Sized CsPbBr3/CsPbCl3 Heterojunction: Breaking the Trade-Off between Sensitivity and Dark Current for Efficient X-ray Detector

Large-area in-Situ Growth of Flexible Perovskite scintillator Film for X-ray indirect detection applications

Ion migration and dark current suppression in quasi-2D perovskite-based X-ray detectors

Cs2AgBiBr6 single-crystal X-ray detectors with a low detection limit

Highly Stable and Sensitive (PEA)2PbBr4/CsPbBr3 Single‐Crystal Heterojunction X‐Ray Detector with Ultra‐Low Detection Limit

Dynamic X-ray imaging with screen-printed perovskite CMOS array

CsPbIBr2 Thick Film With (100)‐Preferred Orientation Enables Highly Sensitive X‐Ray Detector by a Spray‐Coating Method via Dual‐Additive‐Assisted Solution Strategy under Atmospheric Environment

Encapsulated X-Ray Detector Enabled by All-Inorganic Lead-Free Perovskite Film With High Sensitivity and Low Detection Limit

Cs2AgBiBr6-Tellurium Heterojunction-Based High-Performance X-ray Detectors

X-Ray Detector Based on All-Inorganic Lead-Free Cs 2 AgBiBr 6 Perovskite Single Crystal

Suppressed ion migration for high-performance X-ray detectors based on atmosphere-controlled EFG-grown perovskite CsPbBr 3 single crystals