Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

An aerosol-liquid-solid process for the general synthesis of halide perovskite thick films for direct-conversion X-ray detectors

Polycrystalline hybrid perovskite with enhanced ordered crystal domains for sensitive X-ray detection

Ion-exchange-induced slow crystallization of 2D-3D perovskite thick junctions for X-ray detection and imaging

Nonstoichiometry Promoted Solventless Recrystallization of a Thick and Compact CsPbBr3 Film for Real-Time Dynamic X-Ray Imaging

Universal Vapor‐Phase Synthesis of Large‐Scale Ultrathin Perovskites with Superior Stability for Photodetectors and Image Sensors

High-performance metal halide perovskite X-ray detectors fabricated with antisolvent-assisted spray-coating

Ultrasound‐Assisted Crystallization Enables Large‐Area Perovskite Quasi‐Monocrystalline Film for High‐Sensitive X‐ray Detection and Imaging

Vapor-deposited lead-free all-inorganic perovskite films with ultralow dark current for sensitive and stable X-ray detection

Smooth and Compact All‐Inorganic Perovskite Based Heterojunction Films Enabled by Nanocomposite‐Buffered Thermal Imprint for Highly Sensitive X‐Ray Detection

Liquid-Phase Epitaxial Growth of Large-Area MAPbBr 3– n Cl n /CsPbBr 3 Perovskite Single-Crystal Heterojunction for Enhancing Sensitivity and Stability of X-ray Detector

CsPbIBr2 Thick Film With (100)‐Preferred Orientation Enables Highly Sensitive X‐Ray Detector by a Spray‐Coating Method via Dual‐Additive‐Assisted Solution Strategy under Atmospheric Environment

Evaporated Perovskite Thick Junctions for X-Ray Detection

Monolithic integration of perovskite heterojunction on TFT backplanes through vapor deposition for sensitive and stable x-ray imaging

Ion migration and dark current suppression in quasi-2D perovskite-based X-ray detectors

Spray-coating of AgI incorporated metal halide perovskites for high-performance X-ray detection

PDMS‐Assisted Low‐Temperature Synthesis of Submillimeter All‐Inorganic Halide Perovskite Microcrystals for High‐Performance Photodetectors

Suppressed ion migration for high-performance X-ray detectors based on atmosphere-controlled EFG-grown perovskite CsPbBr 3 single crystals

Interlayer-Assisted Growth of Si-Based All-Inorganic Perovskite Films Via Chemical Vapor Deposition for Sensitive and Stable X-ray Detection

High-Quality Single Crystal Perovskite for Highly Sensitive X-Ray Detector

Halide Perovskites: A Dark Horse for Direct X‐ray Imaging

Ultrasensitive and stable X-ray detection using zero-dimensional lead-free perovskites