Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

Monolithic integration of perovskite heterojunction on TFT backplanes through vapor deposition for sensitive and stable x-ray imaging

Co-axial silicon/perovskite heterojunction arrays for high-performance direct-conversion pixelated X-ray detectors

Monolithic Integration of Hybrid Perovskite Single Crystals with Heterogenous Substrate for Highly Sensitive X-ray Imaging

Liquid-Phase Epitaxial Growth of Large-Area MAPbBr 3– n Cl n /CsPbBr 3 Perovskite Single-Crystal Heterojunction for Enhancing Sensitivity and Stability of X-ray Detector

Polycrystalline hybrid perovskite with enhanced ordered crystal domains for sensitive X-ray detection

Smooth and Compact All‐Inorganic Perovskite Based Heterojunction Films Enabled by Nanocomposite‐Buffered Thermal Imprint for Highly Sensitive X‐Ray Detection

Vapor-deposited lead-free all-inorganic perovskite films with ultralow dark current for sensitive and stable X-ray detection

A Wet-Fusing Assembly Strategy for Forming Low Dark Current 2D/3D Perovskite X-Ray Detector on a Thin Film Transistor Backplane

Heterointerface Design of Perovskite Single Crystals for High‐Performance X‐ray Imaging

Flexible, active-matrix flat-panel image sensor for low dose X-ray detection enabled by integration of perovskite photodiode and oxide thin film transistor

Ion-exchange-induced slow crystallization of 2D-3D perovskite thick junctions for X-ray detection and imaging

An aerosol-liquid-solid process for the general synthesis of halide perovskite thick films for direct-conversion X-ray detectors

Lattice‐Gradient Perovskite KTaO3 Films for Ultra‐Stable and Low‐Dose X‐Ray Detector

Evaporated Perovskite Thick Junctions for X-Ray Detection

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

Elimination of Interfacial‐Electrochemical‐Reaction‐Induced Polarization in Perovskite Single Crystals for Ultrasensitive and Stable X‐Ray Detector Arrays

Synergistic strain engineering of perovskite single crystals for highly stable and sensitive X-ray detectors with low-bias imaging and monitoring

Pixellated Perovskite Photodiode on IGZO Thin Film Transistor Backplane for Low Dose Indirect X-Ray Detection

Lattice-Gradient Perovskite KTaO<sub>3</sub> Films for an Ultrastable and Low-Dose X-Ray Detector

Stable perovskite single-crystal X-ray imaging detectors with single-photon sensitivity

Interlayer-Assisted Growth of Si-Based All-Inorganic Perovskite Films Via Chemical Vapor Deposition for Sensitive and Stable X-ray Detection