Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

A Wet-Fusing Assembly Strategy for Forming Low Dark Current 2D/3D Perovskite X-Ray Detector on a Thin Film Transistor Backplane

Two‐dimensionalization of 3D Perovskites for Passive Narrowband Photodetection

Co-axial silicon/perovskite heterojunction arrays for high-performance direct-conversion pixelated X-ray detectors

Monolithic integration of perovskite heterojunction on TFT backplanes through vapor deposition for sensitive and stable x-ray imaging

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode

A Universal Fabrication Strategy for High‐Resolution Perovskite‐Based Photodetector Arrays

Bottom-up construction of low-dimensional perovskite thick films for high-performance X-ray detection and imaging

Wafer-Sized CsPbBr3/CsPbCl3 Heterojunction: Breaking the Trade-Off between Sensitivity and Dark Current for Efficient X-ray Detector

Realizing nearly-zero dark current and ultrahigh signal-to-noise ratio perovskite X-ray detector and image array by dark-current-shunting strategy

Liquid-Phase Epitaxial Growth of Large-Area MAPbBr 3– n Cl n /CsPbBr 3 Perovskite Single-Crystal Heterojunction for Enhancing Sensitivity and Stability of X-ray Detector

Ion migration and dark current suppression in quasi-2D perovskite-based X-ray detectors

Ion-exchange-induced slow crystallization of 2D-3D perovskite thick junctions for X-ray detection and imaging

Sequential Growth of 2D/3D Double‐Layer Perovskite Films with Superior X‐Ray Detection Performance

Evaporated Perovskite Thick Junctions for X-Ray Detection

Supersaturation‐Controlled Growth of Monolithically Integrated Lead‐Free Halide Perovskite Single‐Crystalline Thin Film for High‐Sensitivity Photodetectors

Heterointerface Design of Perovskite Single Crystals for High‐Performance X‐ray Imaging

Vertically Oriented Quasi-2D Perovskite Grown In-Situ by Carbonyl Array-Synergized Crystallization for Direct X-Ray Detectors

Smooth and Compact All‐Inorganic Perovskite Based Heterojunction Films Enabled by Nanocomposite‐Buffered Thermal Imprint for Highly Sensitive X‐Ray Detection

A Photolithography-Free Fabrication Strategy for Perovskite Photodetector Array with High-Security Imaging Application

Two-Dimensional (c4h9nh3)(2)pbbr4 Perovskite Crystals for High-Performance Photodetector

Halide Perovskites: A Dark Horse for Direct X‐ray Imaging