Abstract:X-ray detection is widely utilized in our daily life, such as in medical diagnosis, security checking, and environmental monitoring. However, most of the commercial X-ray detectors are based on inorganic semiconductors, e.g., Si, CdTe, and Ge, which require complex and costly fabrication processes. Metal halide perovskites have recently emerged as a set of promising candidates for ionizing radiation detection, owing to the high attenuation coefficient, long carrier lifetime, and excellent charge transport properties. Perovskite single crystals have been successfully implemented in X-ray detection, but the fragile single crystals limit the device fabrication and the integration with a read-out circuit. In addition, it is hard to reach inch-size single crystals for real application. Flexible devices based on perovskite films or composite films have also been reported, but either the thickness or charge transport properties are limited by the solution processes. In this work, we introduced thermal co-evaporation to deposit highly efficient formamidinium lead iodide perovskite films. Considering the trade-off between X-ray absorption and charge transport, we optimized the active layer thickness and achieved large-area and flexible X-ray detectors with state-of-the-art device performance, including extremely low dark current and noise, fast response, and high sensitivity of 142.1 μC Gyair–1 cm–2.The Supporting Information is available free of charge at <a class="ext-link" href="/doi/10.1021/acsami.0c20973?goto=supporting-info">https://pubs.acs.org/doi/10.1021/acsami.0c20973</a>.Photographs of the front and back of a large-area, evaporated perovskite films deposited on the flexible PET substrate; the device performance statistics of perovskite photodiodes; the J–V characteristics of multiple photodiodes and typical EQE spectra of the optimized photodiode; SEM images; the comparison of the sensitivity of the evaporated perovskite X-ray detectors with various thicknesses; the temporal response of the optimized EPXDs with active layer thickness; and the long-term device stability of the optimized EPXDs encapsulated with a cover glass (<a class="ext-link" href="/doi/suppl/10.1021/acsami.0c20973/suppl_file/am0c20973_si_001.pdf">PDF</a>)This article has not yet been cited by other publications.

High-performance metal halide perovskite X-ray detectors fabricated with antisolvent-assisted spray-coating

Spray-coating of AgI incorporated metal halide perovskites for high-performance X-ray detection

An aerosol-liquid-solid process for the general synthesis of halide perovskite thick films for direct-conversion X-ray detectors

Polycrystalline hybrid perovskite with enhanced ordered crystal domains for sensitive X-ray detection

Evaporated Perovskite Thick Junctions for X-Ray Detection

Smooth and Compact All‐Inorganic Perovskite Based Heterojunction Films Enabled by Nanocomposite‐Buffered Thermal Imprint for Highly Sensitive X‐Ray Detection

Vapor-deposited lead-free all-inorganic perovskite films with ultralow dark current for sensitive and stable X-ray detection

Ion-exchange-induced slow crystallization of 2D-3D perovskite thick junctions for X-ray detection and imaging

CsPbIBr2 Thick Film With (100)‐Preferred Orientation Enables Highly Sensitive X‐Ray Detector by a Spray‐Coating Method via Dual‐Additive‐Assisted Solution Strategy under Atmospheric Environment

Printable thick junction-based lead-free perovskite single crystal powders for X-ray detection

High‐Performance and Self‐Powered X‐Ray Detectors Made of Smooth Perovskite Microcrystalline Films with 100 Μm Grains

Synergistic strain engineering of perovskite single crystals for highly stable and sensitive X-ray detectors with low-bias imaging and monitoring

PDMS‐Assisted Low‐Temperature Synthesis of Submillimeter All‐Inorganic Halide Perovskite Microcrystals for High‐Performance Photodetectors

Rapid, stable and self-powered perovskite detectors via a fast chemical vapor deposition process

Bottom-up construction of low-dimensional perovskite thick films for high-performance X-ray detection and imaging

Supple Formamidinium-Based Low-Dimension Perovskite Derivative for Sensitive and Ultrastable X-ray Detection

Direct drop-casting synthesis of all-inorganic lead and lead-free halide perovskite microcrystals for high-performance photodetectors

Interlayer-Assisted Growth of Si-Based All-Inorganic Perovskite Films Via Chemical Vapor Deposition for Sensitive and Stable X-ray Detection

Micro/Nano Perovskite Materials for Advanced X-ray Detection and Imaging

Perovskite-Based X-ray Detectors

An interfacial toughening strategy for high stability 2D/3D perovskite X-ray detectors with a carbon nanotube thin film electrode