Abstract:The twelve-electron carbon dioxide reduction reaction (12e- CO2RR) constitutes a sustainable alternative to steam cracking for the production of ethylene (C2H4), the world's most coveted organic compound. State-of-theart gas diffusion electrodes (GDEs), while exhibiting promising faradaic efficiencies for C2H4 electrosynthesis, suffer from poor long-term stability, particularly at elevated applied currents, due to catalyst delamination and flooding of the diffusion layer. Herein, through the development and optimisation of a novel, facile and flexible spray-printing method, hydrophobic porous carbon and copper electrodes with different architectures are obtained readily by using suspensions consisting of two fugitive solvents, which provide larger surface areas for the three-phase boundary and improve the hydrophobicity/flooding tolerance of the electrodes, due to their increased surface roughness and binder (PVDF) content. These structures, with pore sizes as low as 60 & mu;m, transform the surfaces from incomplete wetting to highly hydrophobic, and can be employed as gas-diffusion, microporous or supportive layers, in addition to acting as a supporting substrate for the copper-based catalyst. These layers are spray-printed in a stacked assembly upon polymer film and carbon paper substrates, and ultimately result in an extended duration of enhanced C2H4 production at applied currents of up to 200 mA cm-2 via multiple configurations. Through layer-by-layer spray-printing with a hydrophobic microporous layer and porous catalyst support, this inventive approach can efficiently control the hydrophobicity of the GDE, and extends the cathode operation time by a factor of 6, with a maximum faradaic efficiency of 52% attained, and an average of >30% maintained over 12 h of continuous electrolysis, demonstrating the versatility of this technique for engineering highly durable GDEs for selective CO2 reduction toward multi-carbon (C2+) commodities, energy storage devices and other electrochemical applications.

Nonconductive Metal Oxide Gas Diffusion Layer for Mitigating Electrowetting during CO 2 Electrolysis

Antiflooding Gas Diffusion Electrodes Enabled by Liquid-Solid-Liquid Interfaces for Durable CO2 Electrolysis

Introduction of a Conductive Layer into Flood-Resistant Gas Diffusion Electrodes with Polymer Substrate for an Efficient Electrochemical CO 2 Reduction with Copper Oxide

Hydrophobicity Graded Gas Diffusion Layer for Stable Electrochemical Reduction of CO2

Hierarchically Conductive Electrodes Unlock Stable and Scalable CO2 Electrolysis

Facile Spray-Printing of Hydrophobic and Porous Gas Diffusion Electrodes Enabling Prolonged Electrochemical CO2 Reduction to Ethylene

Gas Diffusion Electrode with Microporous Layers of Hydrophobicity Gradient Distribution for CO2 Electrolysis in a Zero-Gap Electrolyzer Operated with Pure Water

Gas diffusion enhanced electrode with ultrathin superhydrophobic macropore structure for acidic CO 2 electroreduction

Gas Diffusion Electrodes (GDEs) for Carbon Dioxide (CO 2 ) Reduction in Microfluidic Cells: Towards a Fluid Dynamics Assisted Rational Design

Pore accessibility matters in CO 2 electrolysis: Preventing H 2 formation and boosting triple-phase boundary on microtubular gas-diffusion electrodes

Hydrophobic 1-octadecanethiol functionalized copper catalyst promotes robust high-current CO2 gas-diffusion electrolysis

Micro/Nano‐Structured Superhydrophobic Gas Diffusion Electrode for Boosting the Stability of Industrial‐Compatible Electrochemical CO Production in Flow Cells

Hydrophobized electrospun nanofibers of hierarchical porosity as the integral gas diffusion electrode for full-pH CO2 electroreduction in membrane electrode assemblies

Electrochemical CO2 Reduction: Tailoring Catalyst Layers in Gas Diffusion Electrodes

Advances and Challenges of Carbon‐Free Gas‐Diffusion Electrodes (GDEs) for Electrochemical CO2 Reduction

Flooded by Success: On the Role of Electrode Wettability in CO2 Electrolyzers That Generate Liquid Products

Impact of gas diffusion layer architecture on the performances of Cu-based electrodes for CO 2 electroreduction to ethylene in flow reactors

Regulating the reaction zone of electrochemical CO2 reduction on gas-diffusion electrodes by distinctive hydrophilic-hydrophobic catalyst layers

Intrinsically Conductive and Cu-Functionalized Polymer-Composite Membranes as Gas Diffusion Electrodes for CO2 Electroreduction

Spatio‐Temporal Electrowetting and Reaction Monitoring in Microfluidic Gas Diffusion Electrode Elucidates Mass Transport Limitations

Modeling mass transfer limitations driven by electrowetting in electrochemical CO 2 reduction at silver gas diffusion electrodes