Abstract:The Supercritical carbon dioxide recompression Brayton cycle (SCO2RBC) is regarded as one of the most promising thermal power conversion systems and mixing other gases with CO2 to change the critical point represents an effective strategy to improve the performance of the Brayton cycle. In this work, the feasibility of using xenon and krypton as additives to the SCO2RBC is investigated via thermodynamic analysis. The effects of the key parameters on the thermo-economic performance of recompression Brayton cycles using CO2, CO2/xenon (mass fraction 0.55/0.45) and CO2/krypton (mass fraction 0.755/0.245) as working fluids are discussed by means of parametric analysis. A non-dominated sorting genetic algorithm is employed to simultaneously optimize the cycle exergy efficiency and the levelized cost of energy. The total thermal conductance, the main compressor outlet pressure, pressure ratio and split ratio are selected as the decision variables. The optimum solutions with their corresponding decision variables are selected from the Pareto frontiers. The results show that the supercritical CO2/krypton cycle has the huge development potential. Specifically, the optimum exergy efficiencies of Brayton cycles using CO2, CO2/xenon and CO2/krypton as working fluids are 0.585, 0.646 and 0.664. The addition of xenon can improve cycle efficiency up to 12.08 % higher than SCO2RBC while the levelized cost of energy also increased by 10.04%. The cycle efficiency of the supercritical CO2/krypton cycle is 9.44 % higher while the cost is 2.49 % higher compared to the SCO2RBC. There are suitable decision variables to make the cost of the cycle using CO2/ krypton lower than that using CO2 while achieving the same exergy efficiency when the required exergy efficiency is in the range of 0.60–0.62. The exergy destruction distribution of Brayton cycle illustrates that high temperature recuperator is the highest exergy destruction component and using CO2-based binary mixtures can reduce the total exergy destruction effectively.

Performance investigation of a novel closed Brayton cycle using supercritical CO2-based mixture as working fluid integrated with a LiBr absorption chiller

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Performance investigation and precooler design of a coupled supercritical CO 2 -based mixture Brayton cycle with absorption refrigeration cycle

Performance Investigation and Precooler Design of a Coupled Supercritical CO2-based Mixture Brayton Cycle with Absorption Refrigeration Cycle

Proposal and Assessment of a Novel Supercritical CO2 Brayton Cycle Integrated with LiBr Absorption Chiller for Concentrated Solar Power Applications

Thermo-economic comparative study and Multi-objective optimization of supercritical CO2-based mixtures Brayton cycle combined with absorption refrigeration cycle

The investigation of thermo-economic performance for dry-cooled closed Brayton cycle coupled to nuclear microreactors using different coolants

Investigation on the performance of the supercritical Brayton cycle with CO2-based binary mixture as working fluid for an energy transportation system of a nuclear reactor

A Microchannel Cooling System with Two-Phase Looped Thermosyphon for a Supercritical Co2 Brayton Cycle

Novel Thermoelectric Generator Enhanced Supercritical Carbon Dioxide Closed-Brayton-cycle Power Generation Systems: Performance Comparison and Configuration Optimization

Assessment of Ternary CO2 Mixtures As Working Fluids in Supercritical Brayton Cycles with Floating Critical Points

Thermo-economic analysis and multi-objective optimization of supercritical Brayton cycles with CO2-based mixtures

Proposal and Thermodynamic Assessment of S-CO2 Brayton Cycle Layout for Improved Heat Recovery

Off-design Performance Analysis of Supercritical CO2 Mixture Brayton Cycle with Floating Critical Points

Off-design performance analysis of supercritical CO 2 mixture Brayton cycle with floating critical points

Assessment on energy and exergy of combined supercritical CO2 Brayton cycles with sizing printed-circuit-heat-exchangers

Development and performance assessment of a novel combined power system integrating a supercritical carbon dioxide Brayton cycle with an absorption heat transformer

Supercritical CO2 Brayton Cycle Design for Small Modular Reactor with a Thermodynamic Analysis Solver

Performance Evaluation of a Direct Air-Cooled Supercritical Recompression Brayton Cycle Using CO2/n-Butane As the Working Fluid Operating under Off-Design Conditions

Thermodynamic Study of Main Compression Intercooling Effects on Supercritical CO2 Recompression Brayton Cycle