Abstract:Supercritical CO2 Brayton cycle has been studied to be used as power conversion system in many fields because of its competitive efficiency and compact structure. When applied to nuclear power systems, cycle parameters that have direct effects on cycle performances will be restricted differently under different reactor designs. At the same time, the small reactor systems based on existing technology and experience in PWR, especially the Small Modular Reactor (SMR), have been favored owing to their advantages on safety, feasibility, and economic benefit. The focus of the present work is on the performances of recuperated S-CO2 Brayton cycle applied to small PWR systems that have a relatively low range of core outlet temperature below 330 oC. The calculation model is based on the laws of thermodynamics and the cycle performance were analyzed. The results show that the inlet parameters of compressor have obvious effects on cycle efficiency due to the radical change of CO2’s thermal physical properties near the critical point. With given reactor outlet temperature and recuperator effectiveness, the cycle efficiency reduces as the compressor inlet temperature rises from 32 to 40 oC. And there exists an optimal compressor inlet pressure to achieve maximum cycle efficiency. Furthermore, this optimal inlet pressure depends on the compressor inlet temperature. It will slightly increase and the maximum cycle efficiency will decrease at elevated compressor inlet temperature. Once the compressor inlet pressure exceeds the optimal value, the influence of compressor inlet temperature on cycle efficiency decreases to negligible. Pinch point is a key consideration for S-CO2 Brayton cycle. Promotion of the recuperator effectiveness can improve the cycle efficiency, but temperature difference at the cold end of recuperator ( ΔTc ) decreases at the same time. Thus the recuperator effectiveness and cycle efficiency has upper limitations to avoid the pinch point. Cycle efficiency shows two extremums according to compressor inlet pressure for given ΔTc . However, the latter situation is not suitable for practical engineering on account of internal pinch point. The results are helpful for the application of S-CO2 Brayton cycle in nuclear power system and provide a basis for subsequent experimental research.

Proposal and Thermodynamic Assessment of S-CO2 Brayton Cycle Layout for Improved Heat Recovery

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Thermodynamic Performance Improvement of Recompression Brayton Cycle Utilizing CO2-C7H8 Binary Mixture

Optimal selection of supercritical CO2 Brayton cycle layouts based on part-load performance

Performance Improvement Overview of the Supercritical Carbon Dioxide Brayton Cycle

Advancements in Supercritical Carbon Dioxide Brayton Cycle for Marine Propulsion and Waste Heat Recovery

Thermodynamic evaluation and optimization of supercritical CO 2 Brayton cycle considering recuperator types and designs

Performance improvement of supercritical carbon dioxide power cycles through its integration with bottoming heat recovery cycles and advanced heat exchanger design: A review

Performance Analysis of Heat Exchangers and Integrated Supercritical CO2 Brayton Cycle for Varying Heat Carrier, Cooling and Working Fluid Flow Rates

Part-load Performance Analysis and Comparison of Supercritical CO2 Brayton Cycles

THERMODYNAMIC ANALYSIS AND SYSTEM DESIGN OF THE SUPERCRITICAL CO2 BRAYTON CYCLE FOR WASTE HEAT RECOVERY OF GAS TURBINE

Performance Analysis and Parametric Optimization of Supercritical Carbon Dioxide Cycle with Bottoming Organic Rankine Cycle

Heat Recuperation for the Self-Condensing CO2 Transcritical Power Cycle

Thermo-economic analysis and multi-objective optimization of supercritical Brayton cycles with CO2-based mixtures

Performance investigation of a novel closed Brayton cycle using supercritical CO2-based mixture as working fluid integrated with a LiBr absorption chiller

Performance of supercritical Brayton cycle using CO2-based binary mixture at varying critical points for SFR applications

Multi-objective optimization of supercritical CO 2 Brayton cycles for coal-fired power generation with two waste heat recovery schemes

Assessment on energy and exergy of combined supercritical CO2 Brayton cycles with sizing printed-circuit-heat-exchangers

Thermodynamic Analysis and Optimization of Binary CO2-Organic Rankine Power Cycles for Small Modular Reactors

Analysis of supercritical CO2 closed Brayton cycle applied to SMR