Abstract:The Supercritical carbon dioxide recompression Brayton cycle (SCO2RBC) is regarded as one of the most promising thermal power conversion systems and mixing other gases with CO2 to change the critical point represents an effective strategy to improve the performance of the Brayton cycle. In this work, the feasibility of using xenon and krypton as additives to the SCO2RBC is investigated via thermodynamic analysis. The effects of the key parameters on the thermo-economic performance of recompression Brayton cycles using CO2, CO2/xenon (mass fraction 0.55/0.45) and CO2/krypton (mass fraction 0.755/0.245) as working fluids are discussed by means of parametric analysis. A non-dominated sorting genetic algorithm is employed to simultaneously optimize the cycle exergy efficiency and the levelized cost of energy. The total thermal conductance, the main compressor outlet pressure, pressure ratio and split ratio are selected as the decision variables. The optimum solutions with their corresponding decision variables are selected from the Pareto frontiers. The results show that the supercritical CO2/krypton cycle has the huge development potential. Specifically, the optimum exergy efficiencies of Brayton cycles using CO2, CO2/xenon and CO2/krypton as working fluids are 0.585, 0.646 and 0.664. The addition of xenon can improve cycle efficiency up to 12.08 % higher than SCO2RBC while the levelized cost of energy also increased by 10.04%. The cycle efficiency of the supercritical CO2/krypton cycle is 9.44 % higher while the cost is 2.49 % higher compared to the SCO2RBC. There are suitable decision variables to make the cost of the cycle using CO2/ krypton lower than that using CO2 while achieving the same exergy efficiency when the required exergy efficiency is in the range of 0.60–0.62. The exergy destruction distribution of Brayton cycle illustrates that high temperature recuperator is the highest exergy destruction component and using CO2-based binary mixtures can reduce the total exergy destruction effectively.

Performance investigation and precooler design of a coupled supercritical CO 2 -based mixture Brayton cycle with absorption refrigeration cycle

Performance Analysis and Evaluation of a Supercritical CO2 Rankine Cycle Coupled with an Absorption Refrigeration Cycle

Thermo-economic comparative study and Multi-objective optimization of supercritical CO2-based mixtures Brayton cycle combined with absorption refrigeration cycle

Parameters Analysis and Techno-Economic Comparison of Various ORCs and Sco2 Cycles As the Power Cycle of Lead–Bismuth Molten Nuclear Micro-Reactor

Experimental and Numerical Investigation on the Dynamic Characteristics of a Lab-Scale Transcritical CO2 Loop

Experimental and Numerical Study on Thermal Hydraulic Performance of Trapezoidal Printed Circuit Heat Exchanger for Supercritical CO2 Brayton Cycle

Theoretical Investigation on the Performance of a Modified Refrigeration Cycle Using Binary Zeotropic Hydrocarbon Mixture R170/R290

Performance investigation of a novel closed Brayton cycle using supercritical CO2-based mixture as working fluid integrated with a LiBr absorption chiller

Thermo-economic analysis and multi-objective optimization of supercritical Brayton cycles with CO2-based mixtures

Design optimization and off-design performance analysis of one-dimensional supercritical CO 2 Brayton cycle

Supercritical carbon dioxide cycle thermodynamic and exergoeconomic improvements using a bidirectional coupling strategy

Performance analysis of two-stage CO2 transcritical refrigeration cycles with absorption subcooling and mechanical recooling

Thermodynamic analysis and evaluation of a novel trans-critical CO2 power system incorporating partial condensation, sub-cooling, and recompression

Effect of Inter-Stage Pressure on Performances of Two-Stage Transcritical CO2 Refrigeration Cycle with Dedicated Absorption Dual-Subcooling and Mechanical Recooling

Influence of Supercritical Carbon Dioxide Brayton Cycle Parameters on Intelligent Circulation System and Its Optimization Strategy

Thermal evaluation of heat exchanger and a dry-cooled supercritical CO 2 mixture Brayton cycle based on three-dimensional and one-dimensional models: Key factors and potential applications

Thermal Evaluation of Heat Exchanger and a Dry-Cooled Supercritical CO2 Mixture Brayton Cycle Based on Three-Dimensional and One-Dimensional Models: Key Factors and Potential Applications

Investigation on the performance of the supercritical Brayton cycle with CO2-based binary mixture as working fluid for an energy transportation system of a nuclear reactor

Thermodynamic evaluation and optimization of supercritical CO 2 Brayton cycle considering recuperator types and designs

Assessment on energy and exergy of combined supercritical CO2 Brayton cycles with sizing printed-circuit-heat-exchangers

Thermodynamic, economic analysis and multi-objective optimization of an improved self-condensing transcritical CO 2 Rankine cycle with two-stage ejector for low grade heat utilization