Abstract:The thermal cracking process of methane does not present the emissions of polluting gases, forming only hydrogen with a high degree of purity and solid carbon that can be commercialized for other industrial purposes globally. Thermodynamic methodologies based on Gibbs energy minimization and entropy maximization are used in the present study to simulate operating conditions of isothermal and adiabatic reactors, respectively. The chemical equilibrium and combined phases problem were written in a non-linear programming form and optimized with the GAMS software using the CONOPT 3 solver. The results obtained by the methodology described in this study present a good agreement with the data reported in the literature, with mean relative deviations lower than 1.08%. High temperatures and low pressures favor the decomposition of methane and the formation of products. When conditioned in an isothermal reactor, total methane conversions are obtained at temperatures above 1200 K at 1 bar. When conditioned to an adiabatic reactor, due to the lack of energy support provided by the isothermal reactor and taking into account that it is an endothermic process, high methane-conversion rates are obtained for temperatures above 1600 K at 1 bar. As an alternative, the combined effects of the addition of hydrogen to the feed combined with a system of extreme pressure variation indicate a possibility of conducting the thermal cracking process of methane in adiabatic systems. Setting the CH4/H2 ratio in the system feed at 1:10 at 1600 K and 50 bar, following severe depressurization through an isentropic valve, varying the pressure from 50 to 1 bar, the methane conversion varies from 0 to 94.712%, thus indicating a possible operational conformation for the process so that the amount of carbon generated is not so harmful to the process, taking into account that the formation of the same occurs only after the reaction and heating processes. Under the same operating conditions, it is possible to use about 40.57% of the generated hydrogen to provide energy for the process to occur.

Thermophysical and physicochemical basis for hydrogen production in compact energy systems of low-carbon economy

Thermodynamic Simulation of Hydrogen Production from the Nano-Cao Reactive Sorption Enhanced Biomass Steam Reforming

An Innovative Micro-Channel Catalyst Support with a Micro-Porous Surface for Hydrogen Production Via Methanol Steam Reforming

Computational Fluid Dynamics Modeling of Thermally Integrated Microchannel Reforming Reactors for Hydrogen Production

A Thermally Autonomous Methanol Steam Reforming Microreactor with Porous Copper Foam As Catalyst Support for Hydrogen Production

Thermodynamic Analysis of Steam Methane Reforming for Hydrogen Production

STEAM REFORMING OF METHANE IN CATALYTIC MICROREACTORS FOR HYDROGEN PRODUCTION

Optimization of an experimental membrane reactor for low-temperature methane steam reforming

Enhanced hydrogen production from thermochemical processes

Heat Transfer and Reaction Characteristics of Steam Methane Reforming in a Novel Composite Packed Bed Microreactor for Distributed Hydrogen Production

Electrified methane reforming: A compact approach to greener industrial hydrogen production

CFD Simulation with Detailed Chemistry of Steam Reforming of Methane for Hydrogen Production in an Integrated Micro-Reactor

An Analysis of the Methane Cracking Process for CO2-Free Hydrogen Production Using Thermodynamic Methodologies

Steam, dry and autothermal methane reforming for hydrogen production: A thermodynamic equilibrium analysis

A review of methane pyrolysis technologies for hydrogen production

CO2 Methane Conversion

Characteristic Investigation on the Methanol Steam Reforming Microchannel Reactor with the Novel Catalytic Combustion Self-Heating Structure for Hydrogen Production

New Perspectives on Catalytic Hydrogen Production by the Reforming, Partial Oxidation and Decomposition of Methane and Biogas

Ammonia Decomposition Coupled with Methane Combustion in Catalytic Microreactors for Hydrogen Production

Electrified Methane Reforming: Understanding the Dynamic Interplay

Conversion of Methane into Liquid Fuels—Bridging Thermal Catalysis with Electrocatalysis