Abstract:<p>Induction heating may be an electrical solution for heating of catalytic reactors. Recent studies have shown that CoNi nanoparticles may act as both inductors for hysteresis heating and catalyst, such that they within an alternating magnetic field are able to drive the strongly endothermic steam methane reforming reaction with > 90% gas conversion at temperatures of ˜800 °C. However, lab-scale induction-heated reactors are limited by low energy transfer efficiency and previous work did not optimize the surrounding instrumentation. Here, we focused on the optimization of an induction setup for steam methane reforming. The performance of the reactor system was investigated through experiments at varying alternating magnetic field, to evaluate the effect of frequency and coil geometry. The results from these experiments were modelled by a simple theoretical framework. Increasing the frequency of the alternating magnetic field from 68 kHz to 189 kHz was found to increase the energy transfer efficiency. Moreover, the energy transfer efficiency also increased when going from a short and wide coil with height to radius ratio of 3.8 to a long and narrow coil with height to radius ratio of 10.8. Overall, the energy transfer efficiency was increased from an initial 11% in the bench scale reactor setup, to 23% in the optimized version. Moreover, combining the bench scale results with the theoretical framework we extrapolated the data to large scale systems. The analysis indicated that the energy efficiency of induction-heated steam reforming systems scaled to larger H<sub>2</sub> capacities may be above 80%. This efficiency would allow the technology to be competitive with other electricity driven routes to hydrogen production when considering only the energy requirements.</p>

Electrified methane reforming: A compact approach to greener industrial hydrogen production

Electrocatalytic Conversion of Methane: Recent Progress and Future Prospects

Electrified Methane Reforming: Understanding the Dynamic Interplay

Distributed electrified heating for efficient hydrogen production

Improving performance of induction-heated steam methane reforming

Electrically heated monolithic catalyst for in-situ hydrogen production by methanol steam reforming

Methane up-carbonizing: A way towards clean hydrogen energy?

Hydrogen production through sorption-enhanced steam methane reforming and membrane technology: A review

Thermophysical and physicochemical basis for hydrogen production in compact energy systems of low-carbon economy

Dynamic Electrification of Dry Reforming of Methane with In Situ Catalyst Regeneration

Enhanced hydrogen production from thermochemical processes

Producing hydrogen by catalytic steam reforming of methanol using non-noble metal catalysts

Use of an Intermediate Solid-State Electrode to Enable Efficient Hydrogen Production from Dilute Organic Matter

Methane Dry Reforming over Ni/Al2O3 Catalyst in Spark Plasma Reactor: Linking Computational Fluid Dynamics (CFD) with Reaction Kinetic Modelling

New Perspectives on Catalytic Hydrogen Production by the Reforming, Partial Oxidation and Decomposition of Methane and Biogas

Low-carbon hydrogen production via molten salt methane pyrolysis with chemical looping combustion: Emission reduction potential and techno-economic assessment

Joule-Heated Catalytic Reactors toward Decarbonization and Process Intensification: A Review

Assessment of Greenhouse Gas Emissions from Hydrogen Production Processes: Turquoise Hydrogen vs. Steam Methane Reforming

Microwave-enhanced methane cracking for clean hydrogen production in shale rocks

Energy, environment, and economic analyses on a novel hydrogen production method by electrified steam methane reforming with renewable energy accommodation

Steam, dry and autothermal methane reforming for hydrogen production: A thermodynamic equilibrium analysis