Abstract:The thermal cracking process of methane does not present the emissions of polluting gases, forming only hydrogen with a high degree of purity and solid carbon that can be commercialized for other industrial purposes globally. Thermodynamic methodologies based on Gibbs energy minimization and entropy maximization are used in the present study to simulate operating conditions of isothermal and adiabatic reactors, respectively. The chemical equilibrium and combined phases problem were written in a non-linear programming form and optimized with the GAMS software using the CONOPT 3 solver. The results obtained by the methodology described in this study present a good agreement with the data reported in the literature, with mean relative deviations lower than 1.08%. High temperatures and low pressures favor the decomposition of methane and the formation of products. When conditioned in an isothermal reactor, total methane conversions are obtained at temperatures above 1200 K at 1 bar. When conditioned to an adiabatic reactor, due to the lack of energy support provided by the isothermal reactor and taking into account that it is an endothermic process, high methane-conversion rates are obtained for temperatures above 1600 K at 1 bar. As an alternative, the combined effects of the addition of hydrogen to the feed combined with a system of extreme pressure variation indicate a possibility of conducting the thermal cracking process of methane in adiabatic systems. Setting the CH4/H2 ratio in the system feed at 1:10 at 1600 K and 50 bar, following severe depressurization through an isentropic valve, varying the pressure from 50 to 1 bar, the methane conversion varies from 0 to 94.712%, thus indicating a possible operational conformation for the process so that the amount of carbon generated is not so harmful to the process, taking into account that the formation of the same occurs only after the reaction and heating processes. Under the same operating conditions, it is possible to use about 40.57% of the generated hydrogen to provide energy for the process to occur.

Microwave-enhanced methane cracking for clean hydrogen production in shale rocks

Electrocatalytic Conversion of Methane: Recent Progress and Future Prospects

Methane up-carbonizing: A way towards clean hydrogen energy?

Microwave-enhanced hydrogen production: a review

Methane catalytic cracking by solid materials and molten media for hydrogen production: A review

Optimizing microwave frequencies for hydrogen and electromagnetic shielding materials production through methane pyrolysis over biochar

A review of methane pyrolysis technologies for hydrogen production

Influences of microwave irradiation on pore, fracture and methane adsorption of deep shale

Hydrogen Production from Crude Oil with Fine Iron Particles Through Microwave-Initiated Catalytic Dehydrogenation Promoted by Emulsified Feed

Experimental and numerical investigation of shock wave-based methane pyrolysis for clean H production

Evolution characteristics of microwave absorbing carbon material on surface of CoFe 2 O 4 @biochar during hydrogen production from methane decomposition process

Microwave-assisted catalytic methane reforming: A review

Production of H2-Rich Syngas From Lignocellulosic Biomass Using Microwave-Assisted Pyrolysis Coupled With Activated Carbon Enabled Reforming

Oxidant-assisted methane pyrolysis

Methane transformation by photocatalysis

Direct methane activation by atomically thin platinum nanolayers on two-dimensional metal carbides

An Analysis of the Methane Cracking Process for CO2-Free Hydrogen Production Using Thermodynamic Methodologies

Enhancement of biomethane production by huminite-enriched lignite pretreated with hydrogen peroxide

Microwave-irradiation promoted Cu/ZnO/Al2O3 catalyst for hydrogen production from steam reforming of methanol

Enhanced hydrogen production in steam methane reforming: Comparative analysis of industrial catalysts and process optimization

Enhanced hydrogen production from straws using microwave-assisted pyrolysis with NiO/C based catalyst/absorbent