Abstract:Dry reforming of methane is one of the few chemical reactions which can effectively convert carbon dioxide (CO2), a major green-house gas, into a valuable chemical precursor, syngas (a mixture of CO and H2), that can be converted into chemicals and fuels via different synthesis routes such as the Fischer Tropsch synthesis. The inherent limitations of dry reforming reaction, for instance, rapid catalyst deactivation by coke deposition and the very high energy requirements, has restricted its use as a commercial technology. This study was performed to evaluate the potential of overcoming the limitations of dry reforming by integrating it with other commercial methane reforming technologies such as steam reforming and partial oxidation reforming in the context of industrial operating conditions. A thermodynamic and kinetic analysis of the combined reforming has been conducted using the software suite MATLAB®. The aim of this complicated assessment is to identify optimized combination of the three reformers and also the corresponding operating conditions that would utilize significant amount of CO2 while ensuring CO2 fixation, minimum carbon formation and optimum energy requirements. The thermodynamic equilibrium product distribution calculations involved the Peng Robinson (PR), Redlich Kwong (RK) and Soave Redlich Kwong (SRK) equations of state (EOS) to identify the best EOS that accounts for the non-ideality associated with the high pressure operation. The study evaluated simultaneous effects of temperature (200°C–1200°C), pressure (1–20bar) and feed mole ratios (of methane, steam, carbon dioxide and oxygen) on the equilibrium product distribution. The addition of oxygen and steam to dry reforming helped in decreasing energy requirements while simultaneously increasing the syngas yield ratio (H2:CO ratio). The numerical evaluation revealed an optimized operating condition of ∼750°C at 1bar pressure at a feed mole ratio CH4:H2O:O2:CO2 of 1:0.4:0.3:1. For this optimization, the system boundaries were limited only to a reformer block without considering the upstream and dowstream processes. At this optimized condition, the carbon deposition was eliminated and the CO2 conversion was observed to be 47.84% with an energy requirement of 180.26kJ. The study is further extended to include kinetic analysis of combined dry and steam reforming of methane. The preliminary findings of kinetic evaluation indicated an excellent agreement between combined kinetic model with the thermodynamic equilibrium results.

Experimental and numerical investigation of shock wave-based methane pyrolysis for clean H production

Shock Wave Heating: A Novel Method for Low-Cost Hydrogen Production

Kinetic Modeling and Experimental Validation of the Pyrolysis of Propane in Hydrogen Plasma

A review of methane pyrolysis technologies for hydrogen production

Understanding of gas-phase methane pyrolysis towards hydrogen and solid carbon with detailed kinetic simulations and experiments

Methane pyrolysis in packed bed reactors: Kinetic modeling, numerical simulations, and experimental insights

Microwave-enhanced methane cracking for clean hydrogen production in shale rocks

Is hydrogen production through natural gas pyrolysis compatible with ambitious climate targets in the United States? A location-specific, time-resolved analysis

Comparative analysis of methane and natural gas pyrolysis for low-GHG hydrogen production

Comparative analysis of methane conversion: pyrolysis, dry and steam thermal plasma reforming

A combined thermo-kinetic analysis of various methane reforming technologies: Comparison with dry reforming

Problems in the reaction mechanism of methane pyrolysis for hydrogen production

Methane up-carbonizing: A way towards clean hydrogen energy?

Chemical Insights into Plasma-Assisted Dry Reforming of Methane in a Nanosecond Discharge

Methane pyrolysis: Kinetic studies and mechanical removal of carbon deposits in reactors of different materials

Methane pyrolysis for hydrogen production: Modeling of soot deposition by computational fluid dynamics and experimental validation

An Analysis of the Methane Cracking Process for CO2-Free Hydrogen Production Using Thermodynamic Methodologies

Production of H2-Rich Syngas From Lignocellulosic Biomass Using Microwave-Assisted Pyrolysis Coupled With Activated Carbon Enabled Reforming

Experiment and simulation of non-catalytic thermal decomposition of CH4 for CO2-free hydrogen production in a vertical tube

Feasibility of a Plasma Furnace for Methane Pyrolysis: Hydrogen and Carbon Production

Kinetic modeling of the steam reforming of light hydrocarbon mixture from waste resources: Effects of gas composition on hydrogen production