Understanding of gas-phase methane pyrolysis towards hydrogen and solid carbon with detailed kinetic simulations and experiments

Manas Mokashi,Akash Bhimrao Shirsath,Patrick Lott,Heinz Müller,Steffen Tischer,Lubow Maier,Olaf Deutschmann
DOI: https://doi.org/10.1016/j.cej.2023.147556
IF: 15.1
2023-11-30
Chemical Engineering Journal
Abstract:Methane (CH 4 ) pyrolysis is studied in a tubular flow reactor for the production of hydrogen and solid carbon by combining kinetic modelling, numerical simulation and experiments in a high-temperature flow reactor. Operating conditions are varied such as temperature in the range of 1273–1873 K, hydrogen addition to the feed with a molar H 2 :CH 4 ratio between 0 and 4, and residence time in the range of 3–7 s. Elementary-step reaction mechanisms consisting of pyrolysis and carbon coupling reactions among C 1 , C 2 , aromatic and polycyclic aromatic hydrocarbon species are used in the numerical simulations of the species profiles in flow direction. A thermodynamic analysis is performed to acquire the boundary conditions for operation as well to estimate probable by-products (C 2 H 2 , C 2 H 4 , C 2 H 6 , C 6 H 6 , C 16 H 10 etc.) over the temperature range. Gas-phase kinetic modelling is performed revealing that CH 4 conversion starts at temperatures above 1273 K. Higher temperatures increase CH 4 conversion and H 2 yield peaking at 1573 K. The cooling temperature gradient downstream of the hot zone in the reactor causes reverse reactions in gas-phase suppressing CH 4 conversion. H 2 addition to the feed is found to be a crucial parameter for controlling the by-product formation. In the experimental study, a solid carbon yield of 84 % is achieved while gaseous by-products remain less than 1 mol-% at 1673 K, H 2 :CH 4 ratio of 2, and residence time of 5 s. Gas-phase reactions are found to be coupled to surface reactions at higher temperatures.
engineering, chemical, environmental
What problem does this paper attempt to address?