Abstract:Reducing carbon emissions in the global economy's energy and industry sectors necessitates not just the implementation of innovative low-emission technologies but also the adoption of techniques for capturing and recycling CO2. The Power-to-X conversion allows the path to the reuse of CO2 originating from fossil fuels burning and other industrial processes, hence reducing the emission of the key greenhouse gas. The use of high-temperature electrochemical devices for such purposes is a promising solution, which has been already deployed as subsidized demo projects. In the present work, the direct electrolysis of the H2O-CO2-H2 mixtures with in situ conversion of CO2 and CO to CH4 was effectively conducted in the temperature range of 575–650 °C using commercial solid oxide half-cell with YSZ-type electrolyte on Ni-YSZ support with a custom lanthanum‑strontium cobaltite anode. The degree of carbon conversion in the atmosphere enriched with hydrogen was close to 90%, but under such conditions, the products are diluted to 5–6 vol% in H2. Reducing the temperature leads to a sufficient increase in the CH4 outcome, but it is constrained by the decline of the cell performance. Electrochemical processes were monitored by impedance spectroscopy and analyzed using the distribution of the relaxation times technique. Analysis of the distribution of relaxation times of impedance spectra showed that two parallel competitive processes can be attributed to CO2 conversion. Peak with characteristic time c.a. 0.1 s might be associated with diffusion-like mass transfer through cermet support, and it plays an important role in the electrochemical conversion at elevated temperature and high current density. Conversely, the peak observed in the vicinity of 5 ms becomes the limiting stage at lower temperature and probably is related to charge transfer or absorption and surface diffusion of carbon-containing species. Electrolysis current density might reach 0.4 A cm−2 even at 600 °C without explicit damage to the electrolyte or electrodes. A brief degradation test demonstrated a minor loss in the electrochemical performance of the cell. Thus, it was demonstrated that direct electrochemical conversion of CO2 to CH4 can be achieved with sufficient productivity using a semi-commercial cell with an active surface of 16 cm2 under conditions compatible with those existing in the state-of-the-art stacks of solid oxide cells.

CO2 Methane Conversion

Catalytic carbon dioxide hydrogenation to methane: A review of recent studies

Electrocatalytic Conversion of Methane: Recent Progress and Future Prospects

Liquid-phase CO2 Hydrogenation to Methanol Synthesis: Solvent Screening, Process Design and Techno-Economic Evaluation

High-rate and selective conversion of CO2 from aqueous solutions to hydrocarbons

Carbon Dioxide Reforming of Methane to Syngas by Thermal Plasma

Interaction of methane with thermal carbon dioxide plasma obtained in the AC plasma torch

Greenhouse Gas Conversion into Hydrocarbons and Oxygenates Using Low Temperature Barrier Discharge Plasma Combined with Zeolite Catalysts

Thermophysical and physicochemical basis for hydrogen production in compact energy systems of low-carbon economy

An Analysis of the Methane Cracking Process for CO2-Free Hydrogen Production Using Thermodynamic Methodologies

Study on Conversion of Ch4-Co2 to Oxygenic Compounds at Low Temperature the Influence of Hydrogen

Possibility of Direct Conversion of CH4 and CO2 to High-Value Products

The Co-Electrolysis of Co2-H2o to Methane Via A Novel Micro-Tubular Electrochemical Reactor

Carbon dioxide capture by direct methanation in co-electrolysis using solid oxide cell

Study on Direct Conversion of Ch4-Co2 to Oxygenated Compounds by Two-Step Reaction Sequence

Effect of СО2 Additives on the Noncatalytic Conversion of Natural Gas into Syngas and Hydrogen

Facilitating CO2–CH4 Reforming Into Syngas and Useful Chemicals by Water‐Cooled Dielectric Barrier Discharge Plasma: Effect of Discharge Power, Gas Mixing, and Mechanism Insight

Reforming of CH4 and CO2 by Combination of Alternating Current-Driven Nonthermal Arc Plasma and Catalyst

Carbon Dioxide and Methane Reforming Using DC Arc Plasma Reactor

Turning a Methanation Co Catalyst into an In–Co Methanol Producer

Catalytic Non-Thermal MilliPulse Plasma for Methanation of CO2 without Carbon Deposition and Catalyst Deactivation