Abstract:Chemiresistive gas sensors have gained attention due to their simple device structure, portability, easy fabrication, and operation. However, one of the major drawbacks of these sensors is their lack of selectivity and low sensing response. The p–n junction-based vapor sensors are gaining significant attention all over the world for their enhanced sensing response and selectivity toward vapor sensing compared to ohmic contact-based chemiresistive sensors. In the present work, attempts have been made to develop the p–n junction-based chemiresistive sensor through interface modulation of nano graphite platelets (NGPs) using functionalized two-dimensional (2D) materials, resulting in the formation of a p–n junction. The nanocomposite sensor has been developed through octaethyl cobalt porphyrin-functionalized nano graphite platelets (OEP-Co-NGPs) (n-type) with tungsten disulfide nanoparticles (WS 2 NPs) (p-type) and analyzed with multiple characterization techniques, including Raman spectroscopy, X-ray diffractometer (XRD), scanning electron microscopy (SEM), contact angle, etc. In this work, both NGPs/WS 2 and OEP-Co-NGPs/WS 2 sensors have been employed for para-nitrophenol (p-NP) vapor detection. The experimental results demonstrated that the OEP-Co-NGPs/WS 2 sensor exhibited an excellent sensing response toward selective detection of p-nitrophenol (p-NP). The creation of the p–n junction through porphyrin-functionalized NGPs into heterostructure has significantly improved the sensing response as compared to the sensor prepared through non-functionalized NGPs. The OEP-Co-NGPs/WS 2 sensor exhibited excellent selectivity even in the presence of inferring gas species, low limiting detection of 0.0459 ppb, excellent repeatability, reproducibility (relative standard deviation (RSD)-0.845%), long-term stability (RSD < 3.01%), and outstanding linearity (coefficient of correlation ( R 2 )—0.909). It also showed a high tolerance to humidity due to the hydrophobic nature of OEP-Co-NGPs. Further, the charge transport mechanism has been studied through a variable range hopping (VRH) model along with the temperature-dependent electrical conductivity of the OEP-Co-NGPs/WS 2 nanocomposite. Thus, the n–p junction-based OEP-Co-NGPs/WS 2 chemiresistive sensor has the potential to be used as a novel p-NP vapor detector that provides excellent performance with good tolerance to environmental humidity.

Design and fabrication of nitrogen-doped tungsten trioxide-based 4-nitrobenzene sensor

Preparation of Mo-doped WO3 as Catalyst for Electrochemical Sensing of 2,4,6-Trinitrophenol

Efficient nitrite determination by electrochemical approach in liquid phase with ultrasonically prepared gold-nanoparticle-conjugated conducting polymer nanocomposites

Zn@ZrO 2 Nanoparticles Decorated on Naringin- Based Sensor for Electrochemical Detection of p -Nitrophenol and o -Nitrophenol

Single-atom Niobium Doped BCN Nanotubes for Highly Sensitive Electrochemical Detection of Nitrobenzene

An enhanced non-enzymatic electrochemical sensor based on the Bi2S3-TiO2 nanocomposite with HNTs for the individual and simultaneous detection of 4-nitrophenol and nitrofurantoin in environmental samples

Development of sensitive electrochemical sensor Ni@CuO/rGO/PtE for the determination of 4-Nitrophenol: An electroanalytical approach for pollution control

Electrochemical Detection and Catalytic Reduction of Nitrobenzene using Bimetallic NiS2/Fe3S4 Magnetic Heterostructure: An Innovative Approach for Environmental Remediation

Self-heated WO3 nanowires for selective and sensitive detection of NO2 gas at room temperature

Nanostructured Mesoporous Tungsten Oxide for Gas Sensor Applications

Preparation of Bi2O3@TiO2 Nanotube Arrays Composite Electrodes and the Detection Performance for 4‐Nitrophenol

Nonenzymatic Amperometric Sensor for Nitrite Detection Based on a Nanocomposite Consisting of Nickel Hydroxide and Reduced Graphene Oxide

Rapid chemiresistive detection of p-nitrophenol through Porphyrin-functionalized 2D materials: a step toward environmental monitoring

Synthesis of Ni2+ ion doped ZnO-MWCNTs nanocomposites using an in situ sol-gel method: an ultra sensitive non-enzymatic uric acid sensing electrode material

NiWO 4 Microflowers on Multi-Walled Carbon Nanotubes for High-Performance NH 3 Detection

An Electroanalytical Enzymeless α-Fe2O3-ZnO Hybrid Nanostructure-Based Sensor for Sensitive Quantification of Nitrite Ions

Au-WO 3 Nanowire-Based Electrodes for NO 2 Sensing

Fabrication of g-C3N4/WO3 Nanocomposite for Efficient Visible Light Photocatalytic Degradation of Rhodamine B and Electrochemical Sensing of 2-Nitrophenol

Ultrasonic-assisted preparation and characterization of magnetic ZnFe2O4/g-C3N4 nanomaterial and their applications towards electrocatalytic reduction of 4-nitrophenol

An ultra-sensitive electrochemical sensor of Ni/Fe-LDH toward nitrobenzene with the assistance of surface functionalization engineering

Hydrothermal Preparation of Manganese Dioxide/Sulfur Doped Reduced Graphene Oxide and Construction of 4-Nitrotoluene Sensor