Abstract:Chemiresistive gas sensors have gained attention due to their simple device structure, portability, easy fabrication, and operation. However, one of the major drawbacks of these sensors is their lack of selectivity and low sensing response. The p–n junction-based vapor sensors are gaining significant attention all over the world for their enhanced sensing response and selectivity toward vapor sensing compared to ohmic contact-based chemiresistive sensors. In the present work, attempts have been made to develop the p–n junction-based chemiresistive sensor through interface modulation of nano graphite platelets (NGPs) using functionalized two-dimensional (2D) materials, resulting in the formation of a p–n junction. The nanocomposite sensor has been developed through octaethyl cobalt porphyrin-functionalized nano graphite platelets (OEP-Co-NGPs) (n-type) with tungsten disulfide nanoparticles (WS 2 NPs) (p-type) and analyzed with multiple characterization techniques, including Raman spectroscopy, X-ray diffractometer (XRD), scanning electron microscopy (SEM), contact angle, etc. In this work, both NGPs/WS 2 and OEP-Co-NGPs/WS 2 sensors have been employed for para-nitrophenol (p-NP) vapor detection. The experimental results demonstrated that the OEP-Co-NGPs/WS 2 sensor exhibited an excellent sensing response toward selective detection of p-nitrophenol (p-NP). The creation of the p–n junction through porphyrin-functionalized NGPs into heterostructure has significantly improved the sensing response as compared to the sensor prepared through non-functionalized NGPs. The OEP-Co-NGPs/WS 2 sensor exhibited excellent selectivity even in the presence of inferring gas species, low limiting detection of 0.0459 ppb, excellent repeatability, reproducibility (relative standard deviation (RSD)-0.845%), long-term stability (RSD < 3.01%), and outstanding linearity (coefficient of correlation ( R 2 )—0.909). It also showed a high tolerance to humidity due to the hydrophobic nature of OEP-Co-NGPs. Further, the charge transport mechanism has been studied through a variable range hopping (VRH) model along with the temperature-dependent electrical conductivity of the OEP-Co-NGPs/WS 2 nanocomposite. Thus, the n–p junction-based OEP-Co-NGPs/WS 2 chemiresistive sensor has the potential to be used as a novel p-NP vapor detector that provides excellent performance with good tolerance to environmental humidity.

Zn@ZrO 2 Nanoparticles Decorated on Naringin- Based Sensor for Electrochemical Detection of p -Nitrophenol and o -Nitrophenol

Rapid chemiresistive detection of p-nitrophenol through Porphyrin-functionalized 2D materials: a step toward environmental monitoring

Ultrasonic-assisted preparation and characterization of magnetic ZnFe2O4/g-C3N4 nanomaterial and their applications towards electrocatalytic reduction of 4-nitrophenol

Electrochemical Sensor for Detection of P-Nitrophenol Based on Nanoporous Gold

Nickel/nitrogen-doped carbon nanocomposites: Synthesis and electrochemical sensor for determination of p-nitrophenol in local environment

Development of sensitive electrochemical sensor Ni@CuO/rGO/PtE for the determination of 4-Nitrophenol: An electroanalytical approach for pollution control

An Efficient Electrochemical Sensor Based on Multi-Walled Carbon Nanotubes Functionalized with Polyethylenimine for Simultaneous Determination of O-Nitrophenol and P-Nitrophenol

A Novel Nitrite Sensor Based on Poly-1-naphthylamine Doped by a Ferrocenesulfonic-Acid-modified Electrode

An enhanced non-enzymatic electrochemical sensor based on the Bi2S3-TiO2 nanocomposite with HNTs for the individual and simultaneous detection of 4-nitrophenol and nitrofurantoin in environmental samples

Electrochemical sensor based on cerium niobium oxide nanoparticles modified electrode for sensing of environmental toxicity in water samples

A reduced graphene oxide-based electrochemical sensing and eco-friendly 4-nitrophenol degradation

Performance of graphene-zinc oxide nanocomposite coated-glassy carbon electrode in the sensitive determination of para-nitrophenol

Ratiometric strategy assisted electrochemical detection of 4-nitrophenol in water samples using nanostructured CuO

An Electroanalytical Enzymeless α-Fe2O3-ZnO Hybrid Nanostructure-Based Sensor for Sensitive Quantification of Nitrite Ions

In situ formed zinc oxide/graphitic carbon nitride nanohybrid for the electrochemical determination of 4-nitrophenol

Nonenzymatic Amperometric Sensor for Nitrite Detection Based on a Nanocomposite Consisting of Nickel Hydroxide and Reduced Graphene Oxide

Three-Dimensional Flower-like Nickel Oxide/Graphene Nanostructures for Electrochemical Detection of Environmental Nitrite

Synthesis and application of Zr-metal–organic framework for simultaneous detection and rapid adsorption of p-nitrophenol from water

Oxidized carboxymethyl cellulose/polyaniline-based hybrid nanocomposite for sensitive detection of environmentally hazardous nitrophenol in real samples

Nanocomposites with ZrO2@S-Doped g-C3N4 as an Enhanced Binder-Free Sensor: Synthesis and Characterization

Efficient nitrite determination by electrochemical approach in liquid phase with ultrasonically prepared gold-nanoparticle-conjugated conducting polymer nanocomposites