Abstract:Chemiresistive gas sensors have gained attention due to their simple device structure, portability, easy fabrication, and operation. However, one of the major drawbacks of these sensors is their lack of selectivity and low sensing response. The p–n junction-based vapor sensors are gaining significant attention all over the world for their enhanced sensing response and selectivity toward vapor sensing compared to ohmic contact-based chemiresistive sensors. In the present work, attempts have been made to develop the p–n junction-based chemiresistive sensor through interface modulation of nano graphite platelets (NGPs) using functionalized two-dimensional (2D) materials, resulting in the formation of a p–n junction. The nanocomposite sensor has been developed through octaethyl cobalt porphyrin-functionalized nano graphite platelets (OEP-Co-NGPs) (n-type) with tungsten disulfide nanoparticles (WS 2 NPs) (p-type) and analyzed with multiple characterization techniques, including Raman spectroscopy, X-ray diffractometer (XRD), scanning electron microscopy (SEM), contact angle, etc. In this work, both NGPs/WS 2 and OEP-Co-NGPs/WS 2 sensors have been employed for para-nitrophenol (p-NP) vapor detection. The experimental results demonstrated that the OEP-Co-NGPs/WS 2 sensor exhibited an excellent sensing response toward selective detection of p-nitrophenol (p-NP). The creation of the p–n junction through porphyrin-functionalized NGPs into heterostructure has significantly improved the sensing response as compared to the sensor prepared through non-functionalized NGPs. The OEP-Co-NGPs/WS 2 sensor exhibited excellent selectivity even in the presence of inferring gas species, low limiting detection of 0.0459 ppb, excellent repeatability, reproducibility (relative standard deviation (RSD)-0.845%), long-term stability (RSD < 3.01%), and outstanding linearity (coefficient of correlation ( R 2 )—0.909). It also showed a high tolerance to humidity due to the hydrophobic nature of OEP-Co-NGPs. Further, the charge transport mechanism has been studied through a variable range hopping (VRH) model along with the temperature-dependent electrical conductivity of the OEP-Co-NGPs/WS 2 nanocomposite. Thus, the n–p junction-based OEP-Co-NGPs/WS 2 chemiresistive sensor has the potential to be used as a novel p-NP vapor detector that provides excellent performance with good tolerance to environmental humidity.

Rapid chemiresistive detection of p-nitrophenol through Porphyrin-functionalized 2D materials: a step toward environmental monitoring

Bioinspired supramolecular arrayed heterojunction-based room-temperature sensor for high-performance gas detection

Sensitive Electrochemical Microbial Biosensor for P-Nitrophenylorganophosphates Based on Electrode Modified with Cell Surface-Displayed Organophosphorus Hydrolase and Ordered Mesopore Carbons.

Zn@ZrO 2 Nanoparticles Decorated on Naringin- Based Sensor for Electrochemical Detection of p -Nitrophenol and o -Nitrophenol

Nickel/nitrogen-doped carbon nanocomposites: Synthesis and electrochemical sensor for determination of p-nitrophenol in local environment

Highly sensitive, selective, repeatable and flexible chemiresistive NO2 sensor based on reduced graphene oxide/free based porphyrin composite

An Efficient Electrochemical Sensor Based on Multi-Walled Carbon Nanotubes Functionalized with Polyethylenimine for Simultaneous Determination of O-Nitrophenol and P-Nitrophenol

MOF-Derived CoPx Nanoparticles Embedded in Nitrogen-Doped Porous Carbon Polyhedrons for Nanomolar Sensing of P-Nitrophenol

Polymer/Graphene oxide nanocomposite thin film for NO2 sensor: An in situ investigation of electronic, morphological, structural, and spectroscopic properties

Ethylene Glycol Functionalized Gadolinium Oxide Nanoparticles as a Potential Electrochemical Sensing Platform for Hydrazine and p-Nitrophenol

Sensitive electrochemical detection of p-nitrophenol by pre-activated glassy carbon electrode integrated with silica nanochannel array film

Development of sensitive electrochemical sensor Ni@CuO/rGO/PtE for the determination of 4-Nitrophenol: An electroanalytical approach for pollution control

A room-temperature chemiresistive NO2 sensor based on one-step synthesized SnO2 nanospheres functionalized with Pd nanoparticles and rGO nanosheets

Self-assembled Ti3C2TX MXene/graphene composite for the electrochemical reduction and detection of p-nitrophenol

A dual-response ratiometric fluorescence imprinted sensor based on metal-organic frameworks for ultrasensitive visual detection of 4-nitrophenol in environments

Two-Dimensional Nickel Porphyrinic Metal–Organic Framework-Modified Electrode for Electrochemical Sensing

Electrochemical Sensor for Detection of P-Nitrophenol Based on Nanoporous Gold

In situ electrochemical synthesis of graphene-poly(arginine) composite for p-nitrophenol monitoring

Enhanced sensitivity and selectivity of ZnSe/PANI nanocomposite for Low-ppm NO 2 detection at room temperature gas sensor application

Tungsten phosphide: a high-performance catalyst for determination of p-nitrophenol, a hazardous water pollutant

An enhanced non-enzymatic electrochemical sensor based on the Bi2S3-TiO2 nanocomposite with HNTs for the individual and simultaneous detection of 4-nitrophenol and nitrofurantoin in environmental samples