Abstract:Chemiresistive gas sensors have gained attention due to their simple device structure, portability, easy fabrication, and operation. However, one of the major drawbacks of these sensors is their lack of selectivity and low sensing response. The p–n junction-based vapor sensors are gaining significant attention all over the world for their enhanced sensing response and selectivity toward vapor sensing compared to ohmic contact-based chemiresistive sensors. In the present work, attempts have been made to develop the p–n junction-based chemiresistive sensor through interface modulation of nano graphite platelets (NGPs) using functionalized two-dimensional (2D) materials, resulting in the formation of a p–n junction. The nanocomposite sensor has been developed through octaethyl cobalt porphyrin-functionalized nano graphite platelets (OEP-Co-NGPs) (n-type) with tungsten disulfide nanoparticles (WS 2 NPs) (p-type) and analyzed with multiple characterization techniques, including Raman spectroscopy, X-ray diffractometer (XRD), scanning electron microscopy (SEM), contact angle, etc. In this work, both NGPs/WS 2 and OEP-Co-NGPs/WS 2 sensors have been employed for para-nitrophenol (p-NP) vapor detection. The experimental results demonstrated that the OEP-Co-NGPs/WS 2 sensor exhibited an excellent sensing response toward selective detection of p-nitrophenol (p-NP). The creation of the p–n junction through porphyrin-functionalized NGPs into heterostructure has significantly improved the sensing response as compared to the sensor prepared through non-functionalized NGPs. The OEP-Co-NGPs/WS 2 sensor exhibited excellent selectivity even in the presence of inferring gas species, low limiting detection of 0.0459 ppb, excellent repeatability, reproducibility (relative standard deviation (RSD)-0.845%), long-term stability (RSD < 3.01%), and outstanding linearity (coefficient of correlation ( R 2 )—0.909). It also showed a high tolerance to humidity due to the hydrophobic nature of OEP-Co-NGPs. Further, the charge transport mechanism has been studied through a variable range hopping (VRH) model along with the temperature-dependent electrical conductivity of the OEP-Co-NGPs/WS 2 nanocomposite. Thus, the n–p junction-based OEP-Co-NGPs/WS 2 chemiresistive sensor has the potential to be used as a novel p-NP vapor detector that provides excellent performance with good tolerance to environmental humidity.

An enhanced non-enzymatic electrochemical sensor based on the Bi2S3-TiO2 nanocomposite with HNTs for the individual and simultaneous detection of 4-nitrophenol and nitrofurantoin in environmental samples

A Review of Nanocomposite-Modified Electrochemical Sensors for Water Quality Monitoring

Iron oxide decorated hexagonal boron nitride modified electrochemical sensor for the detection of nitrofurantoin in human urine samples

Efficient nitrite determination by electrochemical approach in liquid phase with ultrasonically prepared gold-nanoparticle-conjugated conducting polymer nanocomposites

Nano assembly of NiFe spheres anchored on f-MWCNT for electrocatalytic reduction and sensing of nitrofurantoin in biological samples

Zn@ZrO 2 Nanoparticles Decorated on Naringin- Based Sensor for Electrochemical Detection of p -Nitrophenol and o -Nitrophenol

Development of sensitive electrochemical sensor Ni@CuO/rGO/PtE for the determination of 4-Nitrophenol: An electroanalytical approach for pollution control

Zinc Oxide/Phosphorus-Doped Carbon Nitride Composite as Potential Scaffold for Electrochemical Detection of Nitrofurantoin

Electrochemical sensor based on cerium niobium oxide nanoparticles modified electrode for sensing of environmental toxicity in water samples

Bimetallic Cu5Zn8 alloy-embedded hollow porous carbon nanocubes derived from 3D-Cu/ZIF-8 as efficient electrocatalysts for environmental pollutant detection in water bodies

High Sensitivity Detection of Nitrite Electrochemical Sensor Modified with MOF Composite Materials

Rapid chemiresistive detection of p-nitrophenol through Porphyrin-functionalized 2D materials: a step toward environmental monitoring

Ratiometric strategy assisted electrochemical detection of 4-nitrophenol in water samples using nanostructured CuO

Disposable electrochemical sensor: highly sensitive determination of nitrofurazone antibiotic in environmental samples and pharmaceutical formulations

Nanocomposites with ZrO2@S-Doped g-C3N4 as an Enhanced Binder-Free Sensor: Synthesis and Characterization

Multi-core–shell nanoboxes comprising polydopamine-derived C coated NiCo@C and FeCo@C nanohybrid for enhanced electrochemical quantification of nitrofurantoin

Oxidized carboxymethyl cellulose/polyaniline-based hybrid nanocomposite for sensitive detection of environmentally hazardous nitrophenol in real samples

Electrochemical sensors based on platinum-coated MOF-derived nickel-/N-doped carbon nanotubes (Pt/Ni/NCNTs) for sensitive nitrite detection

Deep eutectic solvents-mediated synthesis of barium stannate/halloysite nanotubes-based nanocomposite for electrochemical detection of hazardous 4-nitroaniline

Innovative Use of Carbon Nanofibers/Praseodymium Cobaltite for Targeted Detection of Hematologic Sulfamethazine

Electrochemical Detection and Catalytic Reduction of Nitrobenzene using Bimetallic NiS2/Fe3S4 Magnetic Heterostructure: An Innovative Approach for Environmental Remediation