Abstract:Engineering the electrocatalyst's nanostructure is key-factor in constructing a high-performance electrochemical sensor. The MXene vanadium carbide (V 8 C 7 Tx; VC) nanosheets encapsulating graphitic carbon nanosheets nanocomposite (VC/g-CN NSs NC) as an effective electrocatalyst for detecting clioquinol (CQL) is reported here. The interconnected VC and g-CN nanosheets form a very effective conductive network. The high concentration of O-terminated functional groups in the oxidized VC and the abundant surface area of g-CN contribute to the enhanced electrocatalytic effectiveness of the nanocomposite. The synergistic interaction between the VC NSs and g-CN NSs creates a nanocomposite ideal for CQL detection because it offers many active sites with a fast electron transfer rate. A lower oxidation potential and higher peak current responsiveness distinguish the proposed drug sensor from previously described CQL sensors. Under optimal conditions, the constructed sensors showed strong analytical performance, as shown by a low detection limit of 2.2 nM, high sensitivity of 15.6 μA μM −1 cm −2 , a broad linear range of 0.3–220 μM, and significant recovery outcomes in the analysis of real samples. Thus, the VC/g-CN NSs NC material has promise for use in high-performance electrochemical applications. Graphical Download : Download high-res image (189KB) Download : Download full-size image To ensure food safety and quality, the development of rapid detection of mycotoxins using sensitive and accurate methods is essential. Zearalenone is one of the mycotoxins found in cereals, and its toxicity poses a serious risk to humans. For this concern, a simple ceria silver co doped zinc oxide (Ce-Ag/ZnO) catalyst was prepared by coprecipitation approach. The physical properties of the catalyst were characterized by XRD, FTIR, XPS, FESEM, and TEM. The Ce-Ag/ZnO catalyst was used as an electrode material for the detection of ZEN in food samples due to its synergistic effect and high catalytic activity. The sensor exhibits good catalytic performance with a detection limit of 0.26 μg/mL. Moreover, the efficiency of the prepared sensor was confirmed by selectivity in interference studies and real-time analysis in food samples. Our research is an essential technique for using trimetallic heterostructures to study the construction of sensors. The environmental toxicity of sulfa drugs has attracted significant attention worldwide. Herein, we constructed a carbon-decorated BiPO 4 rod-modified glassy carbon electrode (GCE) for electrochemical detection of sulfamethazine (SMZ). The composite was prepared based on carbon black (CB) and BiPO 4 rods by a simple, greener, nontoxic, and cost-effective ultrasonication method. The physicochemical and electrochemical properties of CB/BiPO 4 composite has characterized using different physicochemical and electrochemical techniques. The developed CB/BiPO 4 composites modified GCE exhibited effective electrochemical active surface area and fast electron transfer rate towards SMZ determination. The developed sensor found wide linear ranges, low limit of detection (LOD), excellent sensitivity, and selectivity. Additionally, the developed sensor successfully analyzed the practical applicability with satisfactory outcomes. Therefore, the present report demonstrates the cheap and cost-effective platform for hazardous SMZ determination. Generally, the nanoparticle along with the nanosheet architecture has excellent physiochemical properties at the interface of electrode and electrolyte. In this work, the SrFe 2 O 4 nanorod was prepared through the simple hydrothermal method, as well as the S-GCN prepared (urea + thiourea) by thermal polymerization, and using the solvent evaporation process SrFe 2 O 4 nanorod was decorated on the S-GCN nanosheet, which is used for the electrochemical detection of flufenamic acid (FFA). The electrocatalytic activity of the bare GCE was enhanced by the SrFe 2 O 4 /S-GCN because SrFe 2 O 4 has more active sides and S-GCN has a large surface area which is confirmed by the EIS and CV analysis. Moreover, the synergistic effect between SrFe 2 O 4 nanorods and the S-GCN nanosheet provides the fast electron transfer property and enhanced electrocatalytic activity towards the FFA. Our proposed sensor exposed the lower level of the detection limit of 0.004 μM and the linear range of 0.01–384 μM with the LOQ of 0.015 μM. Furthermor -Abstract Truncated-

Innovative Use of Carbon Nanofibers/Praseodymium Cobaltite for Targeted Detection of Hematologic Sulfamethazine

Praseodymium Vanadate-Decorated Sulfur-Doped Carbon Nitride Hybrid Nanocomposite: The Role of a Synergistic Electrocatalyst for the Detection of Metronidazole

Zinc molybdate/functionalized carbon nanofiber composites modified electrodes for high-performance amperometric detection of hazardous drug Sulfadiazine

Nanoengineered electrochemical sensor for sensitive detection of carbendazim in environmental waters using Er3NbO7/f-CNF nanocomposite

Ratiometric Fluorescence Nanosensors Based on Core- Shell Structured Carbon/ CdTe Quantum Dots and Surface Molecularly Imprinted Polymers for the Detection of Sulfadiazine

Copper Oxide Anchored Carbon Nanofibers: A Versatile Platform for Multiplex Detection of Antibiotics, Heavy Metals and Pesticides

Regulating water decontamination and food safety by a reusable, nanosized MOF@cotton@chitosan composite through nanomolar detection of drug nitroxinil and organoarsenic feed additive p-arsanilic acid

Hydrothermally synthesized cubical zinc manganite nanostructure for electrocatalytic detection of sulfadiazine

Oxygen-terminated vanadium carbide with graphitic carbon nitride nanosheets modified electrode: A robust electrochemical platform for the sensitive detection of antibiotic drug clioquinol

Enhancing catalytic activity through the construction of praseodymium tungstate decorated on hierarchical three-dimensional porous biocarbon for determination of furazolidone in aquatic samples

Synergistic activation of lamellar bismuth selenide anchored functionalized carbon nanofiber for detecting hazardous carbendazim in environmental water samples

Construction of Cu2Y2O5/g-C3N4 Novel Composite for the Sensitive and Selective Trace-Level Electrochemical Detection of Sulfamethazine in Food and Water Samples

An eco-friendly fluorometric polymer nanoparticle for selectively monitoring sulfadiazine in tap water.

Bimetallic PtNi nanozyme-driven dual-amplified photoelectrochemical aptasensor for ultrasensitive detection of sulfamethazine based on Z-scheme heterostructured Co9S8@In-CdS nanotubes

In-situ growth of MOF-derived Co3S4@MoS2 heterostructured electrocatalyst for the detection of furazolidone

Advanced electrochemical detection of carbendazim in staple food samples using cobalt hydroxide/titanium dioxide nanocomposite

Optimization and performance evaluation of a fluorescent sensor for residual sulfonamide antibiotics in honey samples

Efficient nitrite determination by electrochemical approach in liquid phase with ultrasonically prepared gold-nanoparticle-conjugated conducting polymer nanocomposites

Carrageenan derived polyelectrolyte complexes material: An effective bifunctional for electrochemical sensing of sulfamethazine and antibacterial activity

Cadmium selenium quantum dot based nanosensor with femto molar level sensitivity for the detection of the pesticide endosulfan

A WS2/CNF Nanocomposite for Electrochemical Sensing Applications