Abstract:Abstract Investigations of the response of composites to time-dependent loadings are of considerable importance in structural analysis of many engineering fields, including aerospace, aeronautic, naval and automotive applications. Wave propagation in woven fabric composites poses major theoretical and experimental challenges. The mathematical modeling of dynamic stress concentrations in woven fabric composites is a fairly difficult task due to the great number of wave interactions between the fiber and the matrix. When composite structures composed of woven fabric preforms are loaded impulsively, stress waves propagate in different constituent phases at different speeds, which results in dynamic normal and shearing stresses at the interfacial bond region as well as at the yarn cross-over points. The concentration of these stresses may initiate unstable delamination and eventually failure of the laminated structure. This paper presents a theoretical study on the elastic wave propagation and local dynamic stress concentration in woven fabric composites. The analysis focuses on the unit cell of an orthogonal woven fabric composite, which is composed of two sets of mutually orthogonal yarns of either the same fiber (non-hybrid fabric) or different fibers (hybrid fabric) in a matrix material. Using the mosaic model for simplifying woven fabric composites and a shear lag approach to take into account the inter-yarn deformation, a one-dimensional analysis has been developed to predict the local elastodynamic and elastostatic behavior. The initial and boundary value problems are formulated and then solved using Laplace transforms. Closed form solutions of the dynamic displacements and stresses in each yarn, and the bond shearing stresses at the interfaces between adjacent yarns, are obtained in the time domain for in-plane, as well as out-of-plane impact loadings. When time tends to infinity, the dynamic solutions approach to their corresponding static solutions, which are also developed in this article. Solutions of certain special cases are identical to those reported in the literature. Lastly, the dynamic stresses and bond shearing stresses of plain weave composites subjected to step uniform impacts are presented and discussed as an example of the general analytical model.

Fabric draping simulation in composites manufacturing. Part II: Analytical methods

Fabric draping simulation in composites manufacturing. Part I: Description and applications

Mesoscopic analyses of the draping of 3D woven composite reinforcements based on macroscopic simulations

A Focused Review of the Draping Process and Its Impact on the Resin Infusion in Liquid Composite Molding

A deformation model and draping behavior analysis of plain weave fabric with low-twist yarn on continuous surface

The Influence of Several Carbon Fiber Architecture on the Drapability Effect

Development of a Computationally Efficient Fabric Model for Optimization of Gripper Trajectories in Automated Composite Draping

Comparative study of physical and virtual fabric parameters: physical versus virtual drape test using commercial 3D garment software

Integrated design for the forming process and structural performance of variable-thickness laminates

Draping of plain woven carbon fabrics over a double-curvature mold

Meso-macro simulation of the woven fabric local deformation in draping

Influence of Tension–shear Coupling on Draping of Plain Weave Fabrics

Approach of the constitutive material behaviour of textile composites through simulation

A 2D modeling approach for fluid propagation during FE-forming simulation of continuously reinforced composites in wet compression moulding

Transient Elastic Wave Propagation and Local Dynamic Stress Concentration in Woven Fabric Composites

Spatial distribution of yarns and mechanical properties in 3D braided tubular composites

Numerical Simulation of the Mechanical Behavior of a Weft-Knitted Carbon Fiber Composite under Tensile Loading

Knitted fabric simulation: A survey

A review of the formability of woven fabrics for composite materials

Double diaphragm forming simulation for complex composite structures

Different approaches for woven composite reinforcement forming simulation